T 0681/05 21-04-2006

1. The appeal complies with the requirements of Articles 106 to 108 and with Rules 1(1) and 64(b) EPC and is therefore admissible.

2. Amendments

The characterising feature of claim 1 was added in the appeal proceedings. Since this amendment is based on claim 7 as originally filed, it does not contravene the requirements of Article 123(2) EPC.

3. Novelty

3.1 D1 discloses a stretch releasing adhesive tape article (see for example figures 4 to 6 and 13 to 16) to be mounted on a substrate using a stretch releasing adhesive tape strip having an adhesive portion 1 and a non-adhesive pull tab 2. This article comprises a unitary attachment member 9 including a base plate portion to overlay the tape strip. The base plate portion includes a first portion overlaying the tape strip adhesive portion 1 and a flexible cover portion 12 overlaying said tape strip non-adhesive pull tab, whereby a user can manually urge said cover portion 12 away from said pull tab 2, thereby allowing the user to stretch-remove said tape strip from said unitary attachment member 9 and the substrate.

The attachment member 9 of D1 is injection moulded (see col. 4, lines 33-41) to form a first portion and a collar of the same material so that the flexibility of the first portion is also determined by the collar and cannot be considered in isolation from the collar. The form of the collar has the effect that the base plate's first portion is stiffer than its cover portion, i.e. in the wording of claim 1, the cover portion is more flexible than the base plate first portion.

3.2 However, neither D1 nor D2 discloses the characterising features of claim 1.

3.3 The subject-matter of claim 1 is, therefore, new over the disclosure of documents D1 and D2 (Article 54(1), (2) EPC).

4. Remittal to the first instance

The amended claims clearly meet the objections on which the decision relied.

Under these circumstances, the board considers it appropriate to exercise its discretion under Article 111(1), second sentence, second alternative EPC to remit the case to the examining division for further prosecution, in particular to examine the novelty of the subject-matter of claim 1 with respect to the remaining prior art and its inventive step.

In this respect the board draws the first instance's attention to the fact that in claim 1 a comma is missing after the first mention of "(212;412;512;612)".

5. Reimbursement of the appeal fee

5.1 According to Article 113(1) EPC, the decisions of the European Patent Office may only be based on grounds on which the parties concerned have had an opportunity to present their comments. In this context, the word "grounds" should be interpreted as referring to the essential reasoning, both legal and factual, which leads to the refusal of the application (see T 951/92, point 3, (v), OJ EPO 1996, 53).

5.1.1 In the decision under appeal, it is stated that the feature of claim 1 that the cover portion 12 is more flexible than the base plate first portion is known from D1 because "the cover portion 12 includes a flexible film hinge" (reason a), and also because "the base plate first portion is stiffened by collar 8, 8A see Fig. 5" (reason b).

Reason b was communicated to the appellant only with the decision.

5.1.2 The board takes the view that the above two reasons are both essential parts of the decision's reasoning because they relate to different parts of D1's attachment member 9. Since reason b was not communicated to the appellant (applicant) before the decision was issued, it was not clearly informed of every ground on which the finding of non-compliance was based (see T 951/92, point 3, (v), supra). Thus, the appellant has not had the opportunity to present its comments.

5.1.3 The board therefore concludes that the requirements of Article 113(1) EPC are not met, failure of which amounts to a substantial procedural violation.

5.2 According to the first sentence of Rule 68(2) EPC, the decisions of the European Patent Office which are open to appeal shall be reasoned.

5.2.1 In this respect, the board accepts that "reasoned" does not mean that every argument whatsoever submitted by the applicant should be dealt with in detail, but it is a general principle of good faith and fair proceedings that reasoned decisions contain, in addition to the logical chain of facts and reasons, at least some motivation on crucial points of dispute insofar as this is not already apparent from other reasons given (see for example T 740/93, point 5.4, not published in OJ EPO).

This ensures that the party concerned has a fair idea of why its submissions were not considered convincing so that it can react accordingly. It also ensures that the board can examine the contested decision, as is its primary purpose in appeal proceedings (see G 010/93, point 4, OJ EPO 1995, 172).

5.2.2 In the present case, one of the crucial points in dispute was whether the film hinge of D1 can make the cover portion 12 more flexible than the base plate first portion or not. Nevertheless, the decision merely repeats the examiner's statement in the first communication, i.e. "Said cover 12 is more flexible than the first portion (because the cover portion 12 includes a flexible film hinge …)" and does not specify at all why the applicant's submissions were not considered convincing. Thus, the decision does not contain any motivation on this crucial point of dispute.

5.2.3 The board therefore concludes that the decision was not sufficiently reasoned contrary to the requirements of Rule 68(2) EPC which amounts to a substantial procedural violation.

5.3 The appeal being allowable, the board considers it to be equitable by reason of the above substantial procedural violations to reimburse the appeal fee according to Rule 67 EPC.