Skip to main content Skip to footer
HomeHome
 
  • Homepage
  • Searching for patents

    Patent knowledge

    Access our patent databases and search tools.

    Go to overview 

    • Overview
    • Technical information
      • Overview
      • Espacenet - patent search
      • European Publication Server
      • EP full-text search
    • Legal information
      • Overview
      • European Patent Register
      • European Patent Bulletin
      • European Case Law Identifier sitemap
      • Third-party observations
    • Business information
      • Overview
      • PATSTAT
      • IPscore
      • Technology insight reports
    • Data
      • Overview
      • Technology Intelligence Platform
      • Linked open EP data
      • Bulk data sets
      • Web services
      • Coverage, codes and statistics
    • Technology platforms
      • Overview
      • Plastics in transition
      • Water innovation
      • Space innovation
      • Technologies combatting cancer
      • Firefighting technologies
      • Clean energy technologies
      • Fighting coronavirus
    • Helpful resources
      • Overview
      • First time here?
      • Asian patent information
      • Patent information centres
      • Patent Translate
      • Patent Knowledge News
      • Business and statistics
      • Unitary Patent information in patent knowledge
    Image
    Plastics in Transition

    Technology insight report on plastic waste management

  • Applying for a patent

    Applying for a patent

    Practical information on filing and grant procedures.

    Go to overview 

    • Overview
    • European route
      • Overview
      • European Patent Guide
      • Oppositions
      • Oral proceedings
      • Appeals
      • Unitary Patent & Unified Patent Court
      • National validation
      • Request for extension/validation
    • International route (PCT)
      • Overview
      • Euro-PCT Guide – PCT procedure at the EPO
      • EPO decisions and notices
      • PCT provisions and resources
      • Extension/validation request
      • Reinforced partnership programme
      • Accelerating your PCT application
      • Patent Prosecution Highway (PPH)
      • Training and events
    • National route
    • Find a professional representative
    • MyEPO services
      • Overview
      • Understand our services
      • Get access
      • File with us
      • Interact with us on your files
      • Online Filing & fee payment outages
    • Forms
      • Overview
      • Request for examination
    • Fees
      • Overview
      • European fees (EPC)
      • International fees (PCT)
      • Unitary Patent fees (UP)
      • Fee payment and refunds
      • Warning

    UP

    Find out how the Unitary Patent can enhance your IP strategy

  • Law & practice

    Law & practice

    European patent law, the Official Journal and other legal texts.

    Go to overview 

    • Overview
    • Legal texts
      • Overview
      • European Patent Convention
      • Official Journal
      • Guidelines
      • Extension / validation system
      • London Agreement
      • National law relating to the EPC
      • Unitary patent system
      • National measures relating to the Unitary Patent
    • Court practices
      • Overview
      • European Patent Judges' Symposium
    • User consultations
      • Overview
      • Ongoing consultations
      • Completed consultations
    • Substantive patent law harmonisation
      • Overview
      • The Tegernsee process
      • Group B+
    • Convergence of practice
    • Options for professional representatives
    Image
    Law and practice scales 720x237

    Keep up with key aspects of selected BoA decisions with our monthly "Abstracts of decisions”

  • News & events

    News & events

    Our latest news, podcasts and events, including the European Inventor Award.

    Go to overview 

     

    • Overview
    • News
    • Events
    • European Inventor Award
      • Overview
      • About the award
      • Categories and prizes
      • Meet the finalists
      • Nominations
      • European Inventor Network
      • The 2024 event
    • Young Inventors Prize
      • Overview
      • About the prize
      • Nominations
      • The jury
      • The world, reimagined
      • The 2025 event
    • Press centre
      • Overview
      • Patent Index and statistics
      • Search in press centre
      • Background information
      • Copyright
      • Press contacts
      • Call back form
      • Email alert service
    • Innovation and patenting in focus
      • Overview
      • Water-related technologies
      • CodeFest
      • Green tech in focus
      • Research institutes
      • Women inventors
      • Lifestyle
      • Space and satellites
      • The future of medicine
      • Materials science
      • Mobile communications
      • Biotechnology
      • Patent classification
      • Digital technologies
      • The future of manufacturing
      • Books by EPO experts
    • "Talk innovation" podcast

    Podcast

    From ideas to inventions: tune into our podcast for the latest in tech and IP

  • Learning

    Learning

    The European Patent Academy – the point of access to your learning

    Go to overview 

    • Overview
    • Learning activities and paths
      • Overview
      • Learning activities
      • Learning paths
    • EQE and EPAC
      • Overview
      • EQE - European qualifying examination
      • EPAC - European patent administration certification
      • CSP – Candidate Support Programme
    • Learning resources by area of interest
      • Overview
      • Patent granting
      • Technology transfer and dissemination
      • Patent enforcement and litigation
    • Learning resources by profile
      • Overview
      • Business and IP managers
      • EQE and EPAC Candidates
      • Judges, lawyers and prosecutors
      • National offices and IP authorities
      • Patent attorneys and paralegals
      • Universities, research centres and technology transfer centres (TTOs)
    Image
    Patent Academy catalogue

    Have a look at the extensive range of learning opportunities in the European Patent Academy training catalogue

  • About us

    About us

    Find out more about our work, values, history and vision

    Go to overview 

    • Overview
    • The EPO at a glance
    • 50 years of the EPC
      • Overview
      • Official celebrations
      • Member states’ video statements
      • 50 Leading Tech Voices
      • Athens Marathon
      • Kids’ collaborative art competition
    • Legal foundations and member states
      • Overview
      • Legal foundations
      • Member states of the European Patent Organisation
      • Extension states
      • Validation states
    • Administrative Council and subsidiary bodies
      • Overview
      • Communiqués
      • Calendar
      • Documents and publications
      • Administrative Council
    • Principles & strategy
      • Overview
      • Our mission, vision, values and corporate policy
      • Strategic Plan 2028
      • Towards a New Normal
    • Leadership & management
      • Overview
      • President António Campinos
      • Management Advisory Committee
    • Sustainability at the EPO
      • Overview
      • Environmental
      • Social
      • Governance and Financial sustainability
    • Services & activities
      • Overview
      • Our services & structure
      • Quality
      • Consulting our users
      • European and international co-operation
      • European Patent Academy
      • Chief Economist
      • Ombuds Office
      • Reporting wrongdoing
    • Observatory on Patents and Technology
      • Overview
      • Technologies
      • Innovation actors
      • Policy and funding
      • Tools
      • About the Observatory
    • Procurement
      • Overview
      • Procurement forecast
      • Doing business with the EPO
      • Procurement procedures
      • Sustainable Procurement Policy
      • About eTendering and electronic signatures
      • Procurement portal
      • Invoicing
      • General conditions
      • Archived tenders
    • Transparency portal
      • Overview
      • General
      • Human
      • Environmental
      • Organisational
      • Social and relational
      • Economic
      • Governance
    • Statistics and trends
      • Overview
      • Statistics & Trends Centre
      • Patent Index 2024
      • EPO Data Hub
      • Clarification on data sources
    • History
      • Overview
      • 1970s
      • 1980s
      • 1990s
      • 2000s
      • 2010s
      • 2020s
    • Art collection
      • Overview
      • The collection
      • Let's talk about art
      • Artists
      • Media library
      • What's on
      • Publications
      • Contact
      • Culture Space A&T 5-10
      • "Long Night"
    Image
    Patent Index 2024 keyvisual showing brightly lit up data chip, tinted in purple, bright blue

    Track the latest tech trends with our Patent Index

 
en de fr
  • Language selection
  • English
  • Deutsch
  • Français
Main navigation
  • Homepage
    • Go back
    • New to patents
  • New to patents
    • Go back
    • Your business and patents
    • Why do we have patents?
    • What's your big idea?
    • Are you ready?
    • What to expect
    • How to apply for a patent
    • Is it patentable?
    • Are you first?
    • Patent quiz
    • Unitary patent video
  • Searching for patents
    • Go back
    • Overview
    • Technical information
      • Go back
      • Overview
      • Espacenet - patent search
        • Go back
        • Overview
        • National patent office databases
        • Global Patent Index (GPI)
        • Release notes
      • European Publication Server
        • Go back
        • Overview
        • Release notes
        • Cross-reference index for Euro-PCT applications
        • EP authority file
        • Help
      • EP full-text search
    • Legal information
      • Go back
      • Overview
      • European Patent Register
        • Go back
        • Overview
        • Release notes archive
        • Register documentation
          • Go back
          • Overview
          • Deep link data coverage
          • Federated Register
          • Register events
      • European Patent Bulletin
        • Go back
        • Overview
        • Download Bulletin
        • EP Bulletin search
        • Help
      • European Case Law Identifier sitemap
      • Third-party observations
    • Business information
      • Go back
      • Overview
      • PATSTAT
      • IPscore
        • Go back
        • Release notes
      • Technology insight reports
    • Data
      • Go back
      • Overview
      • Technology Intelligence Platform
      • Linked open EP data
      • Bulk data sets
        • Go back
        • Overview
        • Manuals
        • Sequence listings
        • National full-text data
        • European Patent Register data
        • EPO worldwide bibliographic data (DOCDB)
        • EP full-text data
        • EPO worldwide legal event data (INPADOC)
        • EP bibliographic data (EBD)
        • Boards of Appeal decisions
      • Web services
        • Go back
        • Overview
        • Open Patent Services (OPS)
        • European Publication Server web service
      • Coverage, codes and statistics
        • Go back
        • Weekly updates
        • Updated regularly
    • Technology platforms
      • Go back
      • Overview
      • Plastics in transition
        • Go back
        • Overview
        • Plastics waste recovery
        • Plastics waste recycling
        • Alternative plastics
      • Innovation in water technologies
        • Go back
        • Overview
        • Clean water
        • Protection from water
      • Space innovation
        • Go back
        • Overview
        • Cosmonautics
        • Space observation
      • Technologies combatting cancer
        • Go back
        • Overview
        • Prevention and early detection
        • Diagnostics
        • Therapies
        • Wellbeing and aftercare
      • Firefighting technologies
        • Go back
        • Overview
        • Detection and prevention of fires
        • Fire extinguishing
        • Protective equipment
        • Post-fire restoration
      • Clean energy technologies
        • Go back
        • Overview
        • Renewable energy
        • Carbon-intensive industries
        • Energy storage and other enabling technologies
      • Fighting coronavirus
        • Go back
        • Overview
        • Vaccines and therapeutics
          • Go back
          • Overview
          • Vaccines
          • Overview of candidate therapies for COVID-19
          • Candidate antiviral and symptomatic therapeutics
          • Nucleic acids and antibodies to fight coronavirus
        • Diagnostics and analytics
          • Go back
          • Overview
          • Protein and nucleic acid assays
          • Analytical protocols
        • Informatics
          • Go back
          • Overview
          • Bioinformatics
          • Healthcare informatics
        • Technologies for the new normal
          • Go back
          • Overview
          • Devices, materials and equipment
          • Procedures, actions and activities
          • Digital technologies
        • Inventors against coronavirus
    • Helpful resources
      • Go back
      • Overview
      • First time here?
        • Go back
        • Overview
        • Basic definitions
        • Patent classification
          • Go back
          • Overview
          • Cooperative Patent Classification (CPC)
        • Patent families
          • Go back
          • Overview
          • DOCDB simple patent family
          • INPADOC extended patent family
        • Legal event data
          • Go back
          • Overview
          • INPADOC classification scheme
      • Asian patent information
        • Go back
        • Overview
        • China (CN)
          • Go back
          • Overview
          • Facts and figures
          • Grant procedure
          • Numbering system
          • Useful terms
          • Searching in databases
        • Chinese Taipei (TW)
          • Go back
          • Overview
          • Grant procedure
          • Numbering system
          • Useful terms
          • Searching in databases
        • India (IN)
          • Go back
          • Overview
          • Facts and figures
          • Grant procedure
          • Numbering system
        • Japan (JP)
          • Go back
          • Overview
          • Facts and figures
          • Grant procedure
          • Numbering system
          • Useful terms
          • Searching in databases
        • Korea (KR)
          • Go back
          • Overview
          • Facts and figures
          • Grant procedure
          • Numbering system
          • Useful terms
          • Searching in databases
        • Russian Federation (RU)
          • Go back
          • Overview
          • Facts and figures
          • Numbering system
          • Searching in databases
        • Useful links
      • Patent information centres (PATLIB)
      • Patent Translate
      • Patent Knowledge News
      • Business and statistics
      • Unitary Patent information in patent knowledge
  • Applying for a patent
    • Go back
    • Overview
    • European route
      • Go back
      • Overview
      • European Patent Guide
      • Oppositions
      • Oral proceedings
        • Go back
        • Oral proceedings calendar
          • Go back
          • Calendar
          • Public access to appeal proceedings
          • Public access to opposition proceedings
          • Technical guidelines
      • Appeals
      • Unitary Patent & Unified Patent Court
        • Go back
        • Overview
        • Unitary Patent
          • Go back
          • Overview
          • Legal framework
          • Main features
          • Applying for a Unitary Patent
          • Cost of a Unitary Patent
          • Translation and compensation
          • Start date
          • Introductory brochures
        • Unified Patent Court
      • National validation
      • Extension/validation request
    • International route
      • Go back
      • Overview
      • Euro-PCT Guide
      • Entry into the European phase
      • Decisions and notices
      • PCT provisions and resources
      • Extension/validation request
      • Reinforced partnership programme
      • Accelerating your PCT application
      • Patent Prosecution Highway (PPH)
        • Go back
        • Patent Prosecution Highway (PPH) programme outline
      • Training and events
    • National route
    • MyEPO services
      • Go back
      • Overview
      • Understand our services
        • Go back
        • Overview
        • Exchange data with us using an API
          • Go back
          • Release notes
      • Get access
        • Go back
        • Overview
        • Release notes
      • File with us
        • Go back
        • Overview
        • What if our online filing services are down?
        • Release notes
      • Interact with us on your files
        • Go back
        • Release notes
      • Online Filing & fee payment outages
    • Fees
      • Go back
      • Overview
      • European fees (EPC)
        • Go back
        • Overview
        • Decisions and notices
      • International fees (PCT)
        • Go back
        • Reduction in fees
        • Fees for international applications
        • Decisions and notices
        • Overview
      • Unitary Patent fees (UP)
        • Go back
        • Overview
        • Decisions and notices
      • Fee payment and refunds
        • Go back
        • Overview
        • Payment methods
        • Getting started
        • FAQs and other documentation
        • Technical information for batch payments
        • Decisions and notices
        • Release notes
      • Warning
    • Forms
      • Go back
      • Overview
      • Request for examination
    • Find a professional representative
  • Law & practice
    • Go back
    • Overview
    • Legal texts
      • Go back
      • Overview
      • European Patent Convention
        • Go back
        • Overview
        • Archive
          • Go back
          • Overview
          • Documentation on the EPC revision 2000
            • Go back
            • Overview
            • Diplomatic Conference for the revision of the EPC
            • Travaux préparatoires
            • New text
            • Transitional provisions
            • Implementing regulations to the EPC 2000
            • Rules relating to Fees
            • Ratifications and accessions
          • Travaux Préparatoires EPC 1973
      • Official Journal
      • Guidelines
        • Go back
        • Overview
        • EPC Guidelines
        • PCT-EPO Guidelines
        • Unitary Patent Guidelines
        • Guidelines revision cycle
        • Consultation results
        • Summary of user responses
        • Archive
      • Extension / validation system
      • London Agreement
      • National law relating to the EPC
        • Go back
        • Overview
        • Archive
      • Unitary Patent system
        • Go back
        • Travaux préparatoires to UP and UPC
      • National measures relating to the Unitary Patent 
    • Court practices
      • Go back
      • Overview
      • European Patent Judges' Symposium
    • User consultations
      • Go back
      • Overview
      • Ongoing consultations
      • Completed consultations
    • Substantive patent law harmonisation
      • Go back
      • Overview
      • The Tegernsee process
      • Group B+
    • Convergence of practice
    • Options for professional representatives
  • News & events
    • Go back
    • Overview
    • News
    • Events
    • European Inventor Award
      • Go back
      • Overview
      • About the award
      • Categories and prizes
      • Meet the inventors
      • Nominations
      • European Inventor Network
        • Go back
        • 2024 activities
        • 2025 activities
        • Rules and criteria
        • FAQ
      • The 2024 event
    • Young Inventors Prize
      • Go back
      • Overview
      • About the prize
      • Nominations
      • The jury
      • The world, reimagined
      • The 2025 event
    • Press centre
      • Go back
      • Overview
      • Patent Index and statistics
      • Search in press centre
      • Background information
        • Go back
        • Overview
        • European Patent Office
        • Q&A on patents related to coronavirus
        • Q&A on plant patents
      • Copyright
      • Press contacts
      • Call back form
      • Email alert service
    • In focus
      • Go back
      • Overview
      • Water-related technologies
      • CodeFest
        • Go back
        • CodeFest Spring 2025 on classifying patent data for sustainable development
        • Overview
        • CodeFest 2024 on generative AI
        • CodeFest 2023 on Green Plastics
      • Green tech in focus
        • Go back
        • Overview
        • About green tech
        • Renewable energies
        • Energy transition technologies
        • Building a greener future
      • Research institutes
      • Women inventors
      • Lifestyle
      • Space and satellites
        • Go back
        • Overview
        • Patents and space technologies
      • Healthcare
        • Go back
        • Overview
        • Medical technologies and cancer
        • Personalised medicine
      • Materials science
        • Go back
        • Overview
        • Nanotechnology
      • Mobile communications
      • Biotechnology
        • Go back
        • Overview
        • Red, white or green
        • The role of the EPO
        • What is patentable?
        • Biotech inventors
      • Classification
        • Go back
        • Overview
        • Nanotechnology
        • Climate change mitigation technologies
          • Go back
          • Overview
          • External partners
          • Updates on Y02 and Y04S
      • Digital technologies
        • Go back
        • Overview
        • About ICT
        • Hardware and software
        • Artificial intelligence
        • Fourth Industrial Revolution
      • Additive manufacturing
        • Go back
        • Overview
        • About AM
        • AM innovation
      • Books by EPO experts
    • Podcast
  • Learning
    • Go back
    • Overview
    • Learning activities and paths
      • Go back
      • Overview
      • Learning activities: types and formats
      • Learning paths
    • EQE and EPAC
      • Go back
      • Overview
      • EQE - European Qualifying Examination
        • Go back
        • Overview
        • Compendium
          • Go back
          • Overview
          • Paper F
          • Paper A
          • Paper B
          • Paper C
          • Paper D
          • Pre-examination
        • Candidates successful in the European qualifying examination
        • Archive
      • EPAC - European patent administration certification
      • CSP – Candidate Support Programme
    • Learning resources by area of interest
      • Go back
      • Overview
      • Patent granting
      • Technology transfer and dissemination
      • Patent enforcement and litigation
    • Learning resources by profile
      • Go back
      • Overview
      • Business and IP managers
        • Go back
        • Overview
        • Innovation case studies
          • Go back
          • Overview
          • SME case studies
          • Technology transfer case studies
          • High-growth technology case studies
        • Inventor's handbook
          • Go back
          • Overview
          • Introduction
          • Disclosure and confidentiality
          • Novelty and prior art
          • Competition and market potential
          • Assessing the risk ahead
          • Proving the invention
          • Protecting your idea
          • Building a team and seeking funding
          • Business planning
          • Finding and approaching companies
          • Dealing with companies
        • Best of search matters
          • Go back
          • Overview
          • Tools and databases
          • EPO procedures and initiatives
          • Search strategies
          • Challenges and specific topics
        • Support for high-growth technology businesses
          • Go back
          • Overview
          • Business decision-makers
          • IP professionals
          • Stakeholders of the Innovation Ecosystem
      • EQE and EPAC Candidates
        • Go back
        • Overview
        • Paper F brain-teasers
        • Daily D questions
        • European qualifying examination - Guide for preparation
        • EPAC
      • Judges, lawyers and prosecutors
        • Go back
        • Overview
        • Compulsory licensing in Europe
        • The jurisdiction of European courts in patent disputes
      • National offices and IP authorities
        • Go back
        • Overview
        • Learning material for examiners of national officers
        • Learning material for formalities officers and paralegals
      • Patent attorneys and paralegals
      • Universities, research centres and TTOs
        • Go back
        • Overview
        • Modular IP Education Framework (MIPEF)
        • Pan-European Seal Young Professionals Programme
          • Go back
          • Overview
          • For students
          • For universities
            • Go back
            • Overview
            • IP education resources
            • University memberships
          • Our young professionals
          • Professional development plan
        • Academic Research Programme
          • Go back
          • Overview
          • Completed research projects
          • Current research projects
        • IP Teaching Kit
          • Go back
          • Overview
          • Download modules
        • Intellectual property course design manual
        • PATLIB Knowledge Transfer to Africa
          • Go back
          • Core activities
          • Stories and insights
  • About us
    • Go back
    • Overview
    • The EPO at a glance
    • 50 years of the EPC
      • Go back
      • Official celebrations
      • Overview
      • Member states’ video statements
        • Go back
        • Albania
        • Austria
        • Belgium
        • Bulgaria
        • Croatia
        • Cyprus
        • Czech Republic
        • Denmark
        • Estonia
        • Finland
        • France
        • Germany
        • Greece
        • Hungary
        • Iceland
        • Ireland
        • Italy
        • Latvia
        • Liechtenstein
        • Lithuania
        • Luxembourg
        • Malta
        • Monaco
        • Montenegro
        • Netherlands
        • North Macedonia
        • Norway
        • Poland
        • Portugal
        • Romania
        • San Marino
        • Serbia
        • Slovakia
        • Slovenia
        • Spain
        • Sweden
        • Switzerland
        • Türkiye
        • United Kingdom
      • 50 Leading Tech Voices
      • Athens Marathon
      • Kids’ collaborative art competition
    • Legal foundations and member states
      • Go back
      • Overview
      • Legal foundations
      • Member states
        • Go back
        • Overview
        • Member states by date of accession
      • Extension states
      • Validation states
    • Administrative Council and subsidiary bodies
      • Go back
      • Overview
      • Communiqués
        • Go back
        • 2024
        • Overview
        • 2023
        • 2022
        • 2021
        • 2020
        • 2019
        • 2018
        • 2017
        • 2016
        • 2015
        • 2014
        • 2013
      • Calendar
      • Documents and publications
        • Go back
        • Overview
        • Select Committee documents
      • Administrative Council
        • Go back
        • Overview
        • Composition
        • Representatives
        • Rules of Procedure
        • Board of Auditors
        • Secretariat
        • Council bodies
    • Principles & strategy
      • Go back
      • Overview
      • Mission, vision, values & corporate policy
      • Strategic Plan 2028
        • Go back
        • Driver 1: People
        • Driver 2: Technologies
        • Driver 3: High-quality, timely products and services
        • Driver 4: Partnerships
        • Driver 5: Financial sustainability
      • Towards a New Normal
      • Data protection & privacy notice
    • Leadership & management
      • Go back
      • Overview
      • About the President
      • Management Advisory Committee
    • Sustainability at the EPO
      • Go back
      • Overview
      • Environmental
        • Go back
        • Overview
        • Inspiring environmental inventions
      • Social
        • Go back
        • Overview
        • Inspiring social inventions
      • Governance and Financial sustainability
    • Procurement
      • Go back
      • Overview
      • Procurement forecast
      • Doing business with the EPO
      • Procurement procedures
      • Dynamic Purchasing System (DPS) publications
      • Sustainable Procurement Policy
      • About eTendering
      • Invoicing
      • Procurement portal
        • Go back
        • Overview
        • e-Signing contracts
      • General conditions
      • Archived tenders
    • Services & activities
      • Go back
      • Overview
      • Our services & structure
      • Quality
        • Go back
        • Overview
        • Foundations
          • Go back
          • Overview
          • European Patent Convention
          • Guidelines for examination
          • Our staff
        • Enabling quality
          • Go back
          • Overview
          • Prior art
          • Classification
          • Tools
          • Processes
        • Products & services
          • Go back
          • Overview
          • Search
          • Examination
          • Opposition
          • Continuous improvement
        • Quality through networking
          • Go back
          • Overview
          • User engagement
          • Co-operation
          • User satisfaction survey
          • Stakeholder Quality Assurance Panels
        • Patent Quality Charter
        • Quality Action Plan
        • Quality dashboard
        • Statistics
          • Go back
          • Overview
          • Search
          • Examination
          • Opposition
        • Integrated management at the EPO
      • Consulting our users
        • Go back
        • Overview
        • Standing Advisory Committee before the EPO (SACEPO)
          • Go back
          • Overview
          • Objectives
          • SACEPO and its working parties
          • Meetings
          • Single Access Portal – SACEPO Area
        • Surveys
          • Go back
          • Overview
          • Detailed methodology
          • Search services
          • Examination services, final actions and publication
          • Opposition services
          • Formalities services
          • Customer services
          • Filing services
          • Key Account Management (KAM)
          • Website
          • Archive
      • Our user service charter
      • European and international co-operation
        • Go back
        • Overview
        • Co-operation with member states
          • Go back
          • Overview
        • Bilateral co-operation with non-member states
          • Go back
          • Overview
          • Validation system
          • Reinforced Partnership programme
        • Multilateral international co-operation with IP offices and organisations
        • Co-operation with international organisations outside the IP system
      • European Patent Academy
        • Go back
        • Overview
        • Partners
      • Chief Economist
        • Go back
        • Overview
        • Economic studies
      • Ombuds Office
      • Reporting wrongdoing
    • Observatory on Patents and Technology
      • Go back
      • Overview
      • Technologies
        • Go back
        • Overview
        • Innovation against cancer
        • Assistive robotics
        • Space technologies
      • Innovation actors
        • Go back
        • Overview
        • Startups and SMEs
          • Go back
          • Overview
          • Publications
        • Research universities and public research organisations
      • Policy and funding
        • Go back
        • Overview
        • Financing innovation programme
          • Go back
          • Overview
          • Our studies on the financing of innovation
          • EPO initiatives for patent applicants
          • Financial support for innovators in Europe
        • Patents and standards
          • Go back
          • Overview
          • Publications
          • Patent standards explorer
      • Tools
        • Go back
        • Overview
        • Deep Tech Finder
      • About the Observatory
        • Go back
        • Overview
        • Work plan
    • Transparency portal
      • Go back
      • Overview
      • General
        • Go back
        • Overview
        • Annual Review 2024
          • Go back
          • Overview
          • Executive summary
          • Driver 1 – People
          • Driver 2 – Technologies
          • Driver 3 – High-quality, timely products and services
          • Driver 4 – Partnerships
          • Driver 5 – Financial Sustainability
        • Annual Review 2023
          • Go back
          • Overview
          • Foreword
          • Executive summary
          • 50 years of the EPC
          • Strategic key performance indicators
          • Goal 1: Engaged and empowered
          • Goal 2: Digital transformation
          • Goal 3: Master quality
          • Goal 4: Partner for positive impact
          • Goal 5: Secure sustainability
        • Annual Review 2022
          • Go back
          • Overview
          • Foreword
          • Executive summary
          • Goal 1: Engaged and empowered
          • Goal 2: Digital transformation
          • Goal 3: Master quality
          • Goal 4: Partner for positive impact
          • Goal 5: Secure sustainability
      • Human
      • Environmental
      • Organisational
      • Social and relational
      • Economic
      • Governance
    • Statistics and trends
      • Go back
      • Overview
      • Statistics & Trends Centre
      • Patent Index 2024
        • Go back
        • Insight into computer technology and AI
        • Insight into clean energy technologies
        • Statistics and indicators
          • Go back
          • European patent applications
            • Go back
            • Key trend
            • Origin
            • Top 10 technical fields
              • Go back
              • Computer technology
              • Electrical machinery, apparatus, energy
              • Digital communication
              • Medical technology
              • Transport
              • Measurement
              • Biotechnology
              • Pharmaceuticals
              • Other special machines
              • Organic fine chemistry
            • All technical fields
          • Applicants
            • Go back
            • Top 50
            • Categories
            • Women inventors
          • Granted patents
            • Go back
            • Key trend
            • Origin
            • Designations
      • Data to download
      • EPO Data Hub
      • Clarification on data sources
    • History
      • Go back
      • Overview
      • 1970s
      • 1980s
      • 1990s
      • 2000s
      • 2010s
      • 2020s
    • Art collection
      • Go back
      • Overview
      • The collection
      • Let's talk about art
      • Artists
      • Media library
      • What's on
      • Publications
      • Contact
      • Culture Space A&T 5-10
        • Go back
        • Catalyst lab & Deep vision
          • Go back
          • Irene Sauter (DE)
          • AVPD (DK)
          • Jan Robert Leegte (NL)
          • Jānis Dzirnieks (LV) #1
          • Jānis Dzirnieks (LV) #2
          • Péter Szalay (HU)
          • Thomas Feuerstein (AT)
          • Tom Burr (US)
          • Wolfgang Tillmans (DE)
          • TerraPort
          • Unfinished Sculpture - Captives #1
          • Deep vision – immersive exhibition
          • Previous exhibitions
        • The European Patent Journey
        • Sustaining life. Art in the climate emergency
        • Next generation statements
        • Open storage
        • Cosmic bar
      • "Long Night"
  • Boards of Appeal
    • Go back
    • Overview
    • Decisions of the Boards of Appeal
      • Go back
      • Overview
      • Recent decisions
      • Selected decisions
    • Information from the Boards of Appeal
    • Procedure
    • Oral proceedings
    • About the Boards of Appeal
      • Go back
      • Overview
      • President of the Boards of Appeal
      • Enlarged Board of Appeal
        • Go back
        • Overview
        • Pending referrals (Art. 112 EPC)
        • Decisions sorted by number (Art. 112 EPC)
        • Pending petitions for review (Art. 112a EPC)
        • Decisions on petitions for review (Art. 112a EPC)
      • Technical Boards of Appeal
      • Legal Board of Appeal
      • Disciplinary Board of Appeal
      • Presidium
        • Go back
        • Overview
    • Code of Conduct
    • Business distribution scheme
      • Go back
      • Overview
      • Technical boards of appeal by IPC in 2025
      • Archive
    • Annual list of cases
    • Communications
    • Annual reports
      • Go back
      • Overview
    • Publications
      • Go back
      • Abstracts of decisions
    • Case Law of the Boards of Appeal
      • Go back
      • Overview
      • Archive
  • Service & support
    • Go back
    • Overview
    • Website updates
    • Availability of online services
      • Go back
      • Overview
    • FAQ
      • Go back
      • Overview
    • Publications
    • Ordering
      • Go back
      • Overview
      • Patent Knowledge Products and Services
      • Terms and conditions
        • Go back
        • Overview
        • Patent information products
        • Bulk data sets
        • Open Patent Services (OPS)
        • Fair use charter
    • Procedural communications
    • Useful links
      • Go back
      • Overview
      • Patent offices of member states
      • Other patent offices
      • Directories of patent attorneys
      • Patent databases, registers and gazettes
      • Disclaimer
    • Contact us
      • Go back
      • Overview
      • Filing options
      • Locations
    • Subscription centre
      • Go back
      • Overview
      • Subscribe
      • Change preferences
      • Unsubscribe
    • Official holidays
    • Glossary
    • RSS feeds
Board of Appeals
Decisions

Recent decisions

Overview
  • 2025 decisions
  • 2024 decisions
  • 2023 decisions
  1. Home
  2. T 0975/22 25-01-2024
Facebook X Linkedin Email

T 0975/22 25-01-2024

European Case Law Identifier
ECLI:EP:BA:2024:T097522.20240125
Date of decision
25 January 2024
Case number
T 0975/22
Petition for review of
-
Application number
10005585.4
IPC class
B29C 65/16
Language of proceedings
EN
Distribution
NO DISTRIBUTION (D)

Download and more information:

Decision in EN 611.64 KB
Documentation of the appeal procedure can be found in the European Patent Register
Bibliographic information is available in:
EN
Versions
Unpublished
Application title

Method for manufacturing resin mold assembly

Applicant name
Stanley Electric Co., Ltd.
Opponent name

Leister Technologies AG

LPKF Laser & Electronics AG

Board
3.2.05
Headnote
-
Relevant legal provisions
European Patent Convention Art 56
European Patent Convention Art 83
European Patent Convention Art 84
European Patent Convention Art 100(a)
European Patent Convention Art 123(2)
Rules of procedure of the Boards of Appeal Art 12(2)
Rules of procedure of the Boards of Appeal Art 12(4)
Rules of procedure of the Boards of Appeal Art 12(6)
Rules of procedure of the Boards of Appeal Art 13(2)
Keywords

Grounds for opposition - lack of patentability (yes)

Inventive step - main request (no)

Inventive step - new first auxiliary request (yes)

Late-filed auxiliary request - admitted (yes)

Amendments - added subject-matter (no)

Sufficiency of disclosure (yes)

Claims - clarity (yes)

Late-filed objections

Late-filed objection - admitted (no)

Catchword
-
Cited decisions
G 0003/14
T 1540/14
Citing decisions
-

I. Opponent 1 lodged an appeal against the decision of the opposition division rejecting the two oppositions filed against European patent No. 2 255 952 on the basis of the grounds for opposition under Article 100(a) together with Article 54 EPC (lack of novelty) and Article 56 EPC (lack of inventive step).

II. Among the documents filed before the opposition division, the following were relevant to the appeal proceedings.

D1|"Laserstrahlschweißen thermoplastischer Kunststoffe", Deutscher Verband für Schweißen und verwandte Verfahren E.V. (DVS), Guideline DVS 2243, January 2005 |

D4|"Mit Laser Kunststoff schweissen", Schweizer Maschinenmarkt (SMM) Verbindungstechnik (8), 2002, 20-24 |

D5|US 2005/0258152 A1 |

D6|F. Bachmann and U. Russek, "Laser Welding of Polymers Using High Power Diode Lasers", Proceedings of SPIE Conference, vol. 4637, 2002, German translation |

D8|M. Klimm, "Quasi-Simultanes LASER-Durchstrahlschweißen an Kunststoffgehäusen für elektronische Kfz-Steuergeräte mit hoher Dichtheitsanforderung", Master's thesis, Georg-Simon-Ohm Fachhochschule Nürnberg, 2004|

D9|A. Eltze, "Leistung in Produktivität umsetzen", Kunststoffe (2), 2004, pages 26, 28 and 29. |

III. Together with its statement of grounds of appeal, the appellant filed inter alia following documents:

D13|F. Backes, "Technologieorientierte Bahnplanung für die 3D-Laserstrahlbearbeitung", PhD thesis, Friedrich-Alexander-Universität Erlangen-Nürnberg, ISBN 3-87525-093-1, 1997|

D14|U. Russek, "Laserschweißen von Kunststoffen - Grundlagen, Einflussgrößen, Anwendungen", ISBN 978-3-937889-90-0, 2009, index, 48-49 |

D18|US 2005/0284851 A1 |

D19|US 2006/0163214 A1. |

IV. With letter dated 20 December 2023, opponent 2 informed the board that it would not attend the oral proceedings for which a summons was issued on 10 May 2023.

V. In a communication pursuant to Article 15(1) of the Rules of Procedure of the Boards of Appeal (RPBA) issued on 22 December 2023, the parties were informed of the board's provisional opinion on the issues of the appeal.

VI. Oral proceedings before the board were held on 25 January 2024.

VII. The appellant (opponent 1) requested that the decision under appeal be set aside and that the patent be revoked.

The respondent (patent proprietor) requested that the appeal be dismissed (main request) or that the decision under appeal be set aside and the patent be maintained as amended on the basis of the claims of one of the new first to ninth auxiliary requests filed with letter dated 16 January 2024.

Opponent 2, who was a party as of right pursuant to Article 107, second sentence, EPC, did not file any request in appeal.

VIII. Claim 1 of the patent as granted has the following wording (the feature numbering used in the decision under appeal appears in square brackets):

"1. A method for manufacturing a resin mold assembly, comprising the steps of: [1A] disposing a light transmitting resin member (22) on a light absorbing resin member (21) in such a manner that a first weld region of the light transmitting resin member (22) faces a second weld region of the light absorbing resin member (21); [1B] applying a pressure (P) between the light transmitting resin member (22) and the light absorbing resin member (21) to bring the first weld region of the light transmitting resin member (22) and the second weld region of the light absorbing resin member (21) in a pressed contact in a mutually facing direction; and [1C] applying a laser beam (12s) through the light transmitting resin member (22) on the second weld region of the light absorbing resin member (21), and [1D] scanning the laser beam (12s) over a whole area of the second weld region, to repetitively radiate the laser beam (12s) on the second weld region to heat and melt a whole of the first weld region and second weld region simultaneously, and [1E] welding the light transmitting resin member (22) and the light absorbing resin member (21); characterized in that [1F] a contact surface between said first weld region and said second weld region has a three-dimensional structure, and [1G] an incidence angle of said laser beam (12s) upon said contact surface changes with a position and [1H] a scan velocity of said laser beam (12s) is changed with the position to average a heating temperature."

IX. Claim 1 of the new first auxiliary request has the following additional feature.

"[1I] wherein the scan velocity is changed in accordance with the incidence angle".

X. The parties essentially argued as follows.

Main request - patent as granted

(a) Interpretation of claim 1

- Appellant

Regarding the interpretation of claim 1 as granted, the meaning of features 1G and 1H was rather unspecific. Paragraphs [0046] and [0071] of the patent used a different wording. Anyway, a change in velocity with changing incidence angle was implicit; it all came down to the amount of energy transmitted per unit length. The patent description did not contain any information on averaging a heating temperature. Feature 1H was understood as keeping the energy per unit length within a process window, as explained in document D14.

- Respondent

Features 1G and 1H had to be read in combination. Construing these features in the sense that the incidence angle and the scan velocity might change completely independently of each other at various positions which did not need to coincide, unnaturally and unreasonably separated features 1G and 1H and neglected the technical context as well as the linguistic structure of claim 1. Because of the use of the definite article in "the position" of feature 1H, it was unequivocally clear that this was a direct reference to the "position" of feature 1G along the three-dimensional welding path. Otherwise, claim 1 would have used expressions as "a second position", "another position" or the like. Thus, the scan velocity of the laser beam was changed at the same position along the welding path at which also the incidence angle changed, i.e. it changed in function of the incidence angle. This understanding was supported by the description of the patent, notably in paragraphs [0046] and [0071]. It did not make sense to have a change in incidence angle of the laser beam without adjusting the scan velocity accordingly when attempting to average the heating temperature of the material to be welded.

(b) Inventive step

- Appellant

Document D8 was a thesis related to quasi-simultaneous laser transmission welding. In the scanning arrangement shown in Figure 2-10 of document D8, an f-theta lens focused the laser beam on the workpiece at an incidence angle that changed with position. The different diameter of the spot mentioned in this context referred to the alternative of using a simple lens. It was disclosed in document D8 that the welding parameters, including the scan velocity, had to be adapted to the welding task. The skilled person would thus have adjusted the scan velocity if the process did not provide the desired weld temperature at each position of the contact surface between the weld regions of the resin members. In fact, in the specific example of section 4.3.2, document D8 already disclosed that the scan velocity was increased in the corners of the workpiece to prevent thermal damage. Bubbles and voids caused by overheating could also lead to leakage. The only distinguishing feature was thus feature 1F. The objective technical problem had to be formulated as to improve the teachings of document D8 for laser welding of three-dimensional parts. Regarding obviousness, it was firstly noted that document D8 already contained suggestions of the solution by indicating that quasi-simultaneous welding was not limited to a completely planar welding seam geometry and that contour welding allowed complex seam geometries. But the skilled person also received a clear hint from document D9, which was not incompatible with document D8, that larger three-dimensional parts could be quickly processed using beam scanners. Accordingly, when starting from document D8, the skilled person would have automatically arrived at the solution of claim 1 as granted by routine experimentation and taking into consideration the teaching of document D9. Therefore, the subject-matter of claim 1 as granted did not involve an inventive step.

- Respondent

Firstly, it had to be considered that Figure 2-10 of document D8 was schematic. In practice, f-theta lenses were normally telecentric so that the laser beam impinged perpendicularly on the workpiece irrespective of the angle of deflection caused by the scanning mirrors. Secondly, the reason for using two different velocities when scanning the DQ 250 housing in document D8 was unknown. It was highly doubtful that this was done to prevent leaks and burns at the corners. Figures 3-2 and 3-3 of document D8 showed that the alternative FCVT housing, which was welded at a constant scan velocity, actually had sharper corners compared to the DQ 250 housing. Even if the slightly higher scan velocity in the corners might help to avoid burns, it definitely did not prevent leaks which occurred when welding was insufficient. It seemed that the different scan velocities of document D8 were found by trial and error in the test environment used for the DQ 250 housing and had nothing to do with averaging a heat temperature. A possible explanation might be that, in practice, there was often a delay when scanning around corners so that the scan velocity had to be locally increased. Furthermore, the scan velocity did not change in function of the incidence angle along the contact surface of the DQ 250 housing. In contrast, it changed at a position in the corners where the incidence angle did not change, and it remained constant along the straight edges. Even if, contrary to customary practice, a non-telecentric f-theta lens was used in document D8 so that the laser beam did not impinge perpendicularly on the contact surface, the scan velocity would still not change in function of the incidence angle. At the very least, document D8 failed to clearly teach a change in scan velocity to average a heating temperature. The reason was that Figure 2-10 implied that the angle of incidence of the laser was the highest, and thus the irradiation intensity of the laser the lowest, in the corners of the workpiece. In order to average the temperature, i.e. to keep the amount of energy supplied to the surface of the contact area per area constant and the temperature deviations as small as possible, the scan velocity should thus be reduced, not increased, in the corners. The solution of document D8 actually led to an even lower amount of energy supplied per area and time. Hence, document D8 not only failed to disclose feature 1F, also feature 1H in combination with feature 1G was not disclosed. The objective technical problem was to provide a flexible welding method. Document D9 disclosed that, for laser welding of larger three-dimensional parts, the laser focus was not only scanned in a plane by scanning mirrors, but also followed the contour of the part in the elevational direction. As such, the teaching of document D9 was incompatible with the disclosure of planar scanning in document D8. As had been correctly noted by the opposition division in point 4.3.2.1 of the decision under appeal, the method shown in Figure 2-10 of document D8 was limited to two-dimensional geometries of the contact surface. The skilled person had no reason to use the method known from Figure 2-10 of document D8 for transmission welding of a three-dimensional contact surface and would thus not have consulted document D9 without hindsight. The welding method of document D8 might be made more flexible in many different ways. But even if the laser focus of the scanner of document D8 were moved in the z-direction in order to follow an elevational contour of a workpiece to be welded and to weld three-dimensional parts, such combination would still fail to yield the method as claimed including the combined features 1G and 1H.

Hence, the subject-matter of claim 1 involved an inventive step over a combination of documents D8 and D9.

New first auxiliary request

(a) Admittance

- Appellant

The claims of the new first auxiliary request were filed at a very late stage, namely one week before the oral proceedings before the board. The respondent had not provided sufficient reasons why the request should be admitted. It could not have been surprising that the board arrived at a different claim interpretation in its communication. In the statement of grounds of appeal, it was already pointed out that the scan velocity in document D8 increased in the corners. The respondent should thus have been prepared for such an interpretation. Moreover, the amendment to claim 1 of the new first auxiliary request was not based on the claims as granted, but on the description. The appellant had not been able to properly prepare its reaction to the new request in such a short time. It would seem that the new wording "in accordance" in claim 1 gave rise to a clarity objection, possibly also to objections under Article 83 EPC and Article 123(2) EPC. Therefore, the new first auxiliary request should not be admitted into the appeal proceedings.

- Respondent

The submission of the claims of new first auxiliary request at a late stage of the appeal proceedings was justified by the following cogent reasons. In point 4.2.2 of the decision under appeal, the opposition division had ruled that features 1G and 1H were clearly linked since in feature 1G "a position" was defined and feature 1H referred to "the position". It was thus clear for the skilled person that for a three-dimensional contact surface of the weld region, when the incidence angle of the laser beam changed with a position, also the scan velocity of the laser was actively changed with the position in order to average the heating temperature. When discussing documents D8 and D9 in section 4.8 of the statement of grounds of appeal, the appellant did not question this finding of the opposition division. As such, the respondent had not reason to assume and could not foresee that the board, without cause and of its own motion, arrived at a new and different claim interpretation as expressed in point 18 of its communication pursuant to Article 15(1) RPBA. In view of this new situation which could not have been anticipated, the respondent prepared as soon as possible new auxiliary requests which specifically addressed this unexpected issue. Therefore, the new first auxiliary request should be admitted under Article 13(2) RPBA.

(b) Added subject-matter

- Appellant

The passage of paragraph [0040] of the application as filed had to be read in its context. The preceding paragraph [0039] referred to Figure 1F, which concerned an embodiment with a flat two-dimensional plane. The feature of paragraph [0040] was therefore not disclosed in the context of a contact surface with a three-dimensional structure. Regarding paragraph [0065] of the application as filed, its disclosure was part of the description of Figures 6A to 6C. Immediately before, in paragraph [0064], it was disclosed that the weld plane was tilted. Furthermore, the exact words in paragraph [0065] were "controlling the laser beam scan velocity", which had a more narrow meaning compared to the amendment to claim 1. The term "changing" was more abstract and implied that the scan velocity did not have to change at the same time as the incidence angle. Hence, the requirements of Article 123(2) EPC were not met.

- Respondent

The amendment to claim 1 was based on paragraphs [0040] and [0065] of the application as filed. It clarified even more explicitly the term "changed" of feature 1H of claim 1 as granted and, thus, the relationship between the incidence angle and the scan velocity. There was no difference between changing and controlling in the context of the amended claim 1. Paragraph [0040] of the application as filed did not mention a two-dimensional or three-dimensional structure; the passage was thus perfectly applicable to both. As regards paragraph [0065] of the application as filed, it did not mention tilting. Hence, the requirements of Article 123(2) EPC were met.

(c) Clarity and sufficiency of disclosure

- Appellant

It was not clear from reading claim 1 of the new first auxiliary request how the scan velocity was changed, i.e. whether it increased or decreased. It was a result to be achieved. Therefore, the claim was not clear, contrary to Article 84 EPC.

Furthermore, the invention was not sufficiently disclosed. The teaching of claim 1 was to simply change the velocity. But also the curvature of the contact surface and the heat dissipation should play a role. In fact, the amendment to claim 1 was so broad and vague that there was no sufficient disclosure of the claimed invention. It was merely an invitation to make experiments. Articles 83 and 84 EPC were linked.

- Respondent

The "change in accordance with" of feature 1I was clear to a skilled person who had to average a heating temperature. It was evident that the scan velocity had to change with the incidence angle so as to reduce the amount of energy dissipating in the material.

Regarding the requirements of Article 83 EPC, if the feature that formed the basis for the amendment was already in the description of the patent, then it could not itself make the claimed method so insufficiently disclosed that the skilled person could not implement it any more when they could before the amendment.

(d) Admittance of novelty and inventive step objections

- Appellant

The subject-matter of claim 1 of the new first auxiliary request lacked novelty in view of document D4 or document D6. Furthermore, it did not involve an inventive step in view of document D1 in combination either with the common general knowledge or with document D13, in view of document D8 in combination with document D9, in view of each of documents D1, D4, D6 and D8 in combination with either document D18 or document D19 - be it as separate prior art documents or as evidence of the common general knowledge -, and in view of document D5 in combination with document D1. These objections constituted a reaction to the late-filed new first auxiliary request. All documents were already cited in the statement of grounds of appeal. Moreover, apart from document D13 and documents D18 and D19 (the latter two were already cited in the proceedings before grant), all documents had been presented in the proceedings before the opposition division. The objections should therefore be admitted into the appeal proceedings.

- Respondent

Several new objections were filed on appeal. The following objections should not be admitted into the appeal proceedings under Article 12(6) RPBA.

- lack of novelty in view of document D4 or document D6,

- lack of inventive step in view of document D1 in combination with the common general knowledge or in combination with document D13,

- lack of inventive step in view of any of documents D1, D4, D6 or D8 in combination with either document D18 or document D19, as separate prior art documents or as evidence of the common general knowledge, and

- lack of inventive step in view of document D5 in combination with document D1.

All of these objections could and should have been submitted in the proceedings before the opposition division. There were no exceptional circumstances justifying their late filing. Moreover, documents D18 and D19 were regular prior art documents, not evidence of the common general knowledge.

(e) Inventive step

- Appellant

Document D1 was a directive regarding laser beam welding of thermoplastics. It included a description of quasi-simultaneous welding in sections 5.1.3 and 8.2. A contact surface with a three-dimensional structure was mentioned in section 8.2.2.1. The incidence angle of the laser beam changed with a position along the welding path. The subject-matter of claim 1 of the new first auxiliary request thus differed from the method of document D1 only by features 1H and 1I. The objective technical problem was to provide a laser welding method that uniformalised the temperature distribution in the weld region. The example of section 8.2.2.1 of document D1 already indicated that, in order to keep the process parameters for laser welding of complex three-dimensional contours in a desired range, the radiation intensity could be varied. Section 8.2.2.2 of document D1 taught that the laser power and the scan velocity were the most important parameters; they had to be adapted to the welding task. The skilled person would have been aware of the underlying physics and would have realised that the right amount of energy per surface area had to be delivered to join the workpieces together in a certain process window. As the laser power and the scan velocity were presented as two straightforward alternative solutions in document D1, it would thus have been obvious to modify the scan velocity in order to compensate for a reduced energy per surface area on a tilted surface and to arrive at an average heating temperature that prevented thermal damage, in particular since section 10.1.1 of document D1 suggested to use a pyrometer for measuring temperature and controlling the process. Therefore, the subject-matter of claim 1 of the new first auxiliary request did not involve an inventive step in view of D1 and the common general knowledge.

When starting from document D8, the skilled person would have also arrived at the claimed subject-matter in an obvious manner. Once the geometry of the contact surface of document D8 was adapted in line with the teaching of document D9, it had inclined surfaces where the welding method would run the risk of leaving the process window, be it by producing burns or by insufficient welding. It would have been obvious then in view of the teaching of document D8 to adapt the scan velocity in order to return to within the process window. Implementing the additional feature of claim 1 of the new first auxiliary request did not go beyond routine experimentation.

Document D5 generally related to laser beam machining of three-dimensional workpieces. It explicitly referred to transmission welding of resin materials in paragraph [0005]. Furthermore, document D5 also addressed the welding of three-dimensional shapes in paragraphs [0010] to [0013]. Further disclosed was a welding condition in which a quantity of welding heat was large by an increase in the laser beam output and/or a decrease in the welding speed. In order to set that welding condition, the laser output and the welding speed were changed. It was therefore a suitable starting point for assessing inventive step. The objective technical problem was to provide an alternative parameter for controlling the welding task. From document D1, section 8.2.2.2, the skilled person would have learned that the laser power and the scan velocity were the most important control parameters that had to be adjusted to the welding task. Accordingly, it would have been the straightforward choice for the skilled person to change the scan velocity as an alternative to the laser power. The subject-matter of claim 1 was therefore not inventive when starting from document D5 in combination with document D1.

- Respondent

Document D1 did not mention averaging a heating temperature over the contact surface between the two weld regions. Also, it did not propose to change the scan velocity with changing angle of incidence of the laser beam. According to section 8.2.2.2, the scan velocity was kept constant and one of the other parameters, such as laser power or joining pressure, was changed. It did not teach that any of the parameters were controlled or adjusted during the welding process. There was no teaching to correlate the scan velocity to the incidence angle. The sensor mentioned in section 10.1.1 of document D1 would only measure the temperature in a particular point, at one position, but could not determine the temperature differences along the welding path caused by different incidence angles. Also feature 1F was missing. Document D1 did not disclose a three-dimensional structure in conjunction with quasi-simultaneous welding, except when several scanning systems were used (see section 5.1.3). Section 8.2.2.1 of document D1 was irrelevant because it related to contour welding, i.e. using a laser robot. It had to be taken into account that, unlike with contour welding, the laser beam of a quasi-simultaneous welding method passed several times at a high velocity over each position of the welding path. In agreement with the opposition division, it was submitted that the skilled person, starting from D1 and without hindsight, would not have arrived at the welding method defined in claim 1 of the new first auxiliary request. Thus, the claimed subject-matter involved an inventive step in view of document D1 in combination with the common general knowledge.

For the same reasons as already argued with respect to claim 1 as granted, claim 1 of the new first auxiliary request must involve an inventive step over document D8 in combination with document D9, in particular since the board's understanding of claim 1 was now in line with that of the opposition division. Document D8 did not correlate the scan velocity to the incidence angle. The different scan velocities mentioned for the DQ 250 housing were only caused by the geometry of the corners.

Document D5 was not a suitable starting point. It related to a welding robot irradiating a three-dimensional workpiece with a laser beam by changing the locus speed of the robot and controlling the intensity of the laser beam according to this locus speed in order to prevent the occurrence of voids. Document D5 did not mention averaging a heating temperature over the contact surface between the two weld regions. It did not propose to change the scan velocity with changing angle of incidence of the laser beam. In paragraph [0005] of document D5 transmission welding was mentioned, but only in the context of a prior art discussion. Furthermore, paragraph [0008] indicated that the three-dimensional weld could be made by a robot. Also the further description of the prior art referred to the use of a robot. However, contour welding using a robot was fundamentally different from quasi-simultaneous welding.

In sum, the subject-matter of claim 1 of the new first auxiliary request involved an inventive step.

Main request - patent as granted

Interpretation of claim 1

1. Claim 1 as granted concerns a method for manufacturing a resin mold assembly by means of laser transmission welding. The basic principle of this joining method is that laser energy is used to weld two resin members at their interface. In order to achieve that, the first resin member transmits light and the second resin member absorbs light (feature 1A). Pressure is applied to bring the weld region of each resin member in a pressed contact (feature 1B). A laser beam then passes through the light transmitting resin member on the weld region of the light absorbing resin member (feature 1C) where it is converted into thermal energy. The laser beam is scanned over a whole area of that weld region in a way that repetitively radiates the laser beam on the weld region in order to heat and melt a whole of the weld regions of both resin members simultaneously (feature 1D).

2. Simultaneous heating and melting would imply that the entire weld region is irradiated at once, effectively requiring multiple laser sources. In view of the statements in paragraphs [0044] ("approximately uniformly at the same time") and [0072] ("almost at the same time or simultaneously") of the patent, however, feature 1D of claim 1 as granted is understood to mean that first and second weld regions heat and melt almost at the same time or quasi-simultaneously.

3. Feature 1F of claim 1 as granted limits the first and second weld regions to those having a contact surface with a three-dimensional structure. Thus, the contact surface cannot extend entirely in a two-dimensional plane.

4. The last two features 1G and 1H of claim 1 as granted require that an incidence angle of the laser beam upon the contact surface changes with a position and that a scan velocity of the laser beam is changed with the position to average a heating temperature. The expression "changes with a position" is understood to refer to a position on the contact surface between the first and second weld regions, which is subjected to laser beam radiation, i.e. a position along the welding path. In at least one such position the laser beam impinges on the contact surface under a different angle compared to a second position. As regards the scan velocity, the definite article in the expression "is changed with the position" confirms that it also refers to the position on the contact surface subjected to laser beam radiation, i.e. the position along the welding path. When taken together, features 1G and 1H thus express the condition that both the incidence angle and the scan velocity must not remain constant along the entire welding path. This does not mean, however, that the scan velocity changes at the same position along the welding path as the incidence angle. Nor does the wording of features 1G and 1H require that the scan velocity is adjusted in function of the incidence angle. Both parameters may change independently along the welding path.

5. The respondent is correct when arguing that this interpretation is at odds with the way in which the embodiments of Figures 1A to 1F and 6A to 6C are described in paragraphs [0046] and [0071] of the patent. However, the wording used in these paragraphs ("the scan velocity is controlled in accordance with the incident angle or the distance", "controlling the laser beam scan velocity in accordance with an incident angle") considerably differs from that of claim 1 as granted. Instead of "controlling" or "controlled" the much broader terms "changes" and "is changed" are used in the claim. Moreover, the scan velocity of feature 1H is, if at all, only indirectly connected to the incidence angle of feature 1G through the intermediary of an undefined "position". Claim 1 does not require any "accordance" between the parameters. The board does not see any reason to read into claim 1 as granted a restrictive feature mentioned only in the description and not suggested by the claim wording.

6. It seems appropriate to add that the above understanding of features 1G and 1H is not without technical sense when considering that other unclaimed parameters may also affect the laser energy applied per unit area to the weld region. For example, laser beam diameter and weld line width are mentioned in the context of Figures 8 and 9 of the patent (see paragraphs [0092] to [0098]).

Inventive step

(a) Document D8 as starting point

7. Document D8 is a master's thesis published in 2004 concerning quasi-simultaneous laser transmission welding of plastic housings used in the automotive field. It is undisputed that features 1A to 1E of claim 1 as granted are disclosed by document D8. Section 2.2.4.3, in particular, explains by means of schematic Figure 2-10 how the prior art welding method is carried out. The laser beam is deflected at high speed in x- and y-direction via two scanning mirrors. A so-called f-theta lens then focuses the laser beam onto a flat welding surface. Since the workpiece illustrated in Figure 2-10 has straight edges, the laser beam must irradiate the welding surface with varying incidence angle. The same applies to the cover of the sample housing of substantially rectangular shape shown and discussed in sections 3.2 and 4.2 of document D8 ("Deckelkontur DQ 250"; "DQ 250-Deckel"). It must thus be concluded that the incidence angle of the laser beam changes with a position along the welding path (feature 1G).

8. The respondent countered the board's view on feature 1G by arguing that f-theta lenses were normally telecentric so that the laser beams would always impinge perpendicularly on the workpiece. This allegation was, however, not corroborated by any evidence. There is no mention of telecentric lenses in document D8. Nor is there any indication that an f-theta lens, which is standardly used to focus a laser beam onto a planar imaging field (see also paragraph [0040] of the patent), is inherently telecentric. Rather, the radiation lines in Figure 2-10 of document D8 imply that the laser beam is directed towards the welding surface under an angle with the vertical axis.

9. Regarding feature 1H, section 2.2.4.3 of document D8 already mentions that the scan velocity is a parameter of quasi-simultaneous welding; it may thus vary along the welding path ("die Scangeschwindigkeit muss nicht konstant sein"). A concrete example is provided in section 4.3.2 of document D8, at the bottom of page 47: the cover of the DQ 250 control unit housing is welded using two different scan velocities, 150 mm/s along the straight edges of the joint and 160 mm/s in the corners. As a consequence, the scan velocity is changed with the position of the laser beam along the welding path. In the respondent's view, the burns mentioned in the sentence bridging pages 47 and 48 of document D8 ("wegen Leckagen und Verbrennungen in den Ecken") could be explained by a delay caused by a change in scanning direction around the corners. This argument is convincing. Increasing the scan velocity to 160 mm/s in the corners therefore has the consequence that the heat input is locally reduced. This will bring the heating temperature in the corners closer to an average temperature along the welding path. So, even if the respondent were correct when arguing that the scan velocities disclosed by document D8 were found by trial and error in a test environment, the method for manufacturing the DQ 250 housing of document D8 provides for a change in scan velocity in the sense of feature 1H.

10. In view of the above, the only distinguishing feature of claim 1 as granted with respect to the disclosure of document D8 is that a contact surface between said first weld region and said second weld region has a three-dimensional structure (feature 1F). Contrary to this requirement, document D8 mentions at more than one occasion that its quasi-simultaneous welding method is confined to two-dimensional contact surfaces (page 9: "außer Quasisimultan, da nur 2D"; page 12: "eine praktische ebene Schweißnahtgeometrie").

(b) Objective technical problem

11. The technical effect of feature 1F lies therein that there are less constraints on the resin members that can be welded. The method thus becomes more flexible. In agreement with the respondent, the objective technical problem can then be formulated as to provide a flexible welding method.

(c) Obviousness

12. The skilled person facing the problem of how to provide a flexible welding method would have readily found a solution in document D9, which also concerns the manufacture of plastic housings in the automotive field by way of quasi-simultaneous laser transmission welding (page 26, right column: "[b]eim hier eingesetzten Quasi-Simultanschweißen"). In the section on page 28 entitled "3D-Bauteile bearbeiten", document D9 describes a new generation of scanning systems that are able to scan the x- and y-coordinates while adjusting the focal distance to control the z-coordinate and, hence, allow welding of larger three-dimensional components. Such scanning systems are said to open up new possibilities in component design and seam weld geometry that conventional cutting processes cannot achieve. In other words, the welding method becomes more flexible compared to standard two-dimensional welding methods.

13. The respondent argued that the teaching of document D9 was incompatible with the disclosure of planar scanning in document D8. The board disagrees. In the section on three-dimensional components, document D9 further suggests to produce three-dimensional welding seams by means of a standard quasi-simultaneous welding method without the need of a dedicated 3D-scanner ("Allerdings kann auch schon ohne den Einsatz dieser 3D-Scanner in gewissen Grenzen ein Bauteil mit einer Schweißnaht, die nicht in einer Ebene liegt, produziert werden"). With the good depth of field obtained at longer focal distances deviations from the plane of around 15 mm can be processed with consistent results ("Daher können Bauteil-Unebenheiten bzw. Abweichungen aus der Ebene von etwa 15 mm bei gleich bleibenden Ergebnissen bearbeitet werden"). This means that no drastic changes are required to make the welding method of document D8 more flexible; it suffices to use the minor change in focal diameter at larger focal distances to weld the light transmitting resin member and the light absorbing resin member also at uneven, i.e. three-dimensionally structured regions on the contact surface. No hindsight is required to realise this. Therefore, the teaching of document D9 would have prompted the skilled person to extend the method of document D8 also to contact surfaces having a three-dimensional structure, in accordance with feature 1F.

14. In view of the above considerations, the board concludes that the subject-matter of claim 1 as granted does not involve inventive step having regard to the combination of documents D8 and D9. Hence, the ground for opposition under Article 100(a) together with Article 56 EPC prejudices the maintenance of the patent as granted.

New first auxiliary request

Admittance

15. The claims of the new first auxiliary request were filed after the date on which the board's communication under Article 15(1) RPBA was notified to the parties. Pursuant to Article 13(2) RPBA in the version which entered into force on 1 January 2024 and applies to all appeal proceedings pending on or after that date (see OJ EPO 2023, A103), any amendment to a party's appeal case made after the expiry of a period specified by the Board in a communication under Rule 100, paragraph 2, EPC or, where such a communication is not issued, after notification of a communication under Article 15, paragraph 1, is, in principle, not taken into account unless there are exceptional circumstances, which have been justified with cogent reasons by the party concerned.

16. It was the respondent's case that the late submission was a legitimate and timely response to the claim interpretation advanced for the first time in point 18 of the board's communication pursuant to Article 15(1) RPBA. The board agrees. Neither the opposition division in the decision under appeal nor the appellant in its statement of grounds of appeal had hinted at a broad understanding of features 1G and 1H in the sense that the scanning velocity did not have to be adjusted in function of the incidence angle. When the board raised this issue in its communication and subsequently inferred a lack of inventive step in view of the combination of documents D8 and D9, new and unforeseen developments occurred in the appeal proceedings which lead to circumstances that can be qualified as exceptional.

17. Furthermore, the amendment to claim 1 in the new first auxiliary request addressed the board's interpretation of features 1G and 1H. It did not seem to make the proceedings more complex or give them a new direction. Rather, it was considered to be a legitimate attempt to adapt the claim wording in terms of the relationship between scan velocity and incidence angle so as to yield an interpretation that the parties had already agreed on before the board's communication.

18. For the above reasons, the board exercised its discretion under Article 13(2) RPBA and took the claims of the new first auxiliary request into account.

Interpretation of claim 1

19. Claim 1 of the new first auxiliary request has the additional requirement that the scan velocity is changed in accordance with the incidence angle (feature 1I). This requirement is understood to imply a certain relationship or function between the scan velocity and the incidence angle in the sense that the value of the scan velocity follows from a specified value of the incidence angle. The incidence angle is thus known or has to be determined, and serves as an input to control the scan velocity.

Added subject-matter

20. Basis for the amendment of claim 1 can be found in paragraphs [0040] and [0065] of the description of the application as filed. Both passages disclose that the scan velocity is controlled in accordance with the incidence angle. Paragraph [0040] immediately follows the description of Figure 1F, in which a two-dimensional weld region is scanned. It discusses a mode of operation wherein the weld region deviates from a perfectly circular shape. Paragraph [0065] pertains to the detailed description of Figure 6C and, as such, relates to geometries with a tilted weld plane. In view of the limits to achieving a uniform heating temperature by tilting the weld plane (paragraph [0064]) it is proposed also here to control the scan velocity in accordance with the incidence angle. At the end of paragraph [0062], the following statement can be found: "this embodiment is similarly applicable to the three-dimensional structure of the weld region". Further considering that claim 6 as filed already discloses the change in scan velocity in combination with a contact surface with a three-dimensional structure, the board concludes that there is no inextricable link between feature 1I and the tilted weld plane of Figure 6C so that the amendment is disclosed in the context of general contact surfaces with a three-dimensional structure (feature 1F).

21. The requirements of Article 123(2) EPC are thus met.

Sufficiency of disclosure

22. The appellant saw a non-compliance with Article 83 EPC therein that unmentioned parameters such as the curvature of the contact surface and the heat dissipation also had to play a role in averaging the heating temperature at the weld region. The board disagrees. Firstly, it is important to note that the features of claim 1 of the new first auxiliary request were already disclosed in the patent as granted. However, the appellant did not raise the ground for opposition under Article 100(b) EPC to object against a lack of sufficient disclosure. Furthermore, the patent in suit repeatedly mentions the objective to achieve a constant incidence energy per unit time and unit area at any position in the weld region (see, for example, paragraphs [0046], [0062], [0071]). The person skilled in the art may rely on common general knowledge to supplement the information contained in the patent and fill in possible gaps in the patent disclosure, for example by realising that the incidence angle for a contact surface with a three-dimensional structure would be determined by the local curvature of the surface and the heat dissipation would depend on the thermal conductivity of the materials used. As the appellant failed to provide any detailed arguments why the skilled person would be unable to put the method of claim 1 into practice without the burden of exercising inventive skill, the board must conclude that the requirements of Article 83 EPC are met.

Clarity

23. It was further disputed by the parties whether the amendment to claim 1 of the new first auxiliary request introduced a lack of clarity pursuant to Article 84 EPC. The board observes that claim 1 as granted already required the laser beam scan velocity to change with the position to average the heating temperature. This requirement of feature 1H may thus not be examined for compliance with Article 84 EPC (cf. G 3/14, OJ EPO 2015, A102). Also outside the board's extent to examine clarity lies the question how the scan velocity is changed with different positions; this immediately touches on the requirement of feature 1H. What can be examined under Article 84 EPC is thus limited to the subject-matter introduced by the amendment of feature 1I, namely that the change in scan velocity occurs in accordance with the incidence angle. However, the appellant did not raise any objection against this new subject-matter. Its grievance with regard to Article 84 EPC was restricted to the subject-matter already contained in claim 1 as granted.

24. In any case, the board adds that it cannot see how the claimed relationship between the scan velocity and the incidence angle of feature 1I is unclear or in contradiction with any other features of claim 1. The appellant's objection under Article 84 EPC is therefore not convincing.

Admittance of novelty and inventive step objections

25. At the oral proceedings held before the board, the appellant raised several novelty and inventive step objections against claim 1 of the new first auxiliary request. The respondent requested not to admit the novelty objections in view of document D4 or document D6, the inventive step objections in view of document D1 in combination with the common general knowledge or in combination with document D13, the inventive step objections in view of any of documents D1, D4, D6 or D8 in combination with either document D18 or document D19 - as separate prior art documents or as evidence of the common general knowledge -, and the inventive step objection in view of document D5 in combination with document D1.

(a) Novelty objections in view of document D4 or document D6

26. The provision of Article 12(6), second sentence, RPBA stipulates that the board shall not admit objections which should have been submitted, or which were no longer maintained, in the proceedings leading to the decision under appeal, unless the circumstances of the appeal case justify their admittance.

27. It follows from page 1 of the minutes of the oral proceedings held before the opposition division that neither the appellant nor opponent 2 contested the novelty of the subject-matter of claim 1 as granted. Point 8 of the 'Facts and Submissions' and point 3.1 of the reasons for the decision under appeal confirm that none of the novelty objections raised during the written proceedings before the opposition division were maintained.

28. When the appellant raised a novelty objection in view of document D4 in its statement of grounds of appeal, it effectively resubmitted an objection that it had withdrawn in the proceedings leading to the decision under appeal. This was no different when it argued lack of novelty in respect of the subject-matter of claim 1 of the new first auxiliary request at the oral proceedings held before the board. Under Article 12(6), second sentence, RPBA such an objection is not admitted, unless the circumstances of the appeal case justify their admittance. The appellant did, however, not present any such justification other than that the novelty objection was a reaction to a newly filed claim request. Given that claim 1 had been further limited compared to the granted version with the result that its understanding by the board was now fully in line with both the opposition division's and the parties' interpretation of the subject-matter of granted claim 1 (see points 1. to 6. and 19. above; see also point 17. above), it was not apparent why the novelty objection was previously withdrawn and then reintroduced at the appeal stage. Further considering that the purpose of an appeal is to review what was decided at first instance, not what was not decided, the board decided not to admit the novelty objection in view of document D4 into the appeal proceedings (Article 12(6), second sentence, RPBA).

29. The novelty objection in view of document D6 was presented for the first time on appeal. But also here, no justification for its late-filing was provided by the appellant, nor was it apparent from the file that there were circumstances that would speak in favour of the admission of the new objection. In particular, no matters seem to have arisen for the first time either during the oral proceedings held before the opposition division or in the reasons for the decision under appeal which could not have been foreseen by the parties and which prompted the appellant's reaction in the form of a new novelty objection presented both in the statement of grounds of appeal and at the oral proceedings held before the board. On the contrary, at the oral proceedings held before the opposition division, the appellant opted to drop its novelty objections and not to pursue the inventive step objections it had presented in the written proceedings in view of document D6 (see page 1 of the minutes). Taking further into account that the subject-matter of claim 1 of the new first auxiliary request was limited compared to claim 1 as granted in a way which reflected the opposition division's and the parties' previous understanding of the claimed subject-matter, the board came to the conclusion that the novelty objection in view of document D6 could and should have been submitted in the proceedings leading to the decision under appeal. It was therefore not admitted into the appeal proceedings (Article 12(6), second sentence, RPBA).

(b) Inventive step objection over document D1 in combination with the common general knowledge

30. It is evident from point 4.3.1 of the reasons for the decision under appeal that the appellant had raised an objection of lack of inventive step against claim 1 as granted starting from either document D1 or document D5. The main argument of the appellant apparently was that, "[f]aced with the problem of a three-dimensional weld region where the incidence angle and thus the irradiation density of the laser changes with the position of the laser beam on the weld region the skilled person would [...] consider changing the scan velocity in order to keep the irradiation intensity constant". In point 4.3.1.1 of the reasons for the decision under appeal, the opposition division made its own analysis of document D1 and concluded "that the skilled person, starting from D1 and without hindsight, would not arrive at the welding method defined in claim 1 as granted".

31. In view of the above, the board judges that the inventive step objection starting from document D1 in combination with common general knowledge was already part of the decision under appeal. In consequence, it was also part of the appellant's appeal case, which in accordance with Article 12(2) RPBA is directed to the requests, facts, objections, arguments and evidence on which the decision under appeal was based. Hence, the inventive step objection starting from document D1 in combination with common general knowledge was not an amendment of the appellant's appeal case in the sense of Article 12(4), first sentence, RPBA. It was thus de facto in the appeal proceedings.

(c) Inventive step objection over document D1 in combination with document D13

32. At the oral proceedings held before the board, the appellant raised an objection of lack of inventive step over a combination of documents D1 and D13 against claim 1 of the new first auxiliary request. Such an objection had not been presented before, neither during the proceedings before the opposition division nor in the written appeal proceedings. The admittance of this inventive step objection thus underlay the provisions of Article 13(2) RPBA (see point 15. above).

33. The appellant did not present any convincing reasons why the circumstances invoked by the filing the claims of the new first auxiliary request had to be regarded as exceptional. Nor can the board identify any causal link between the amended wording of claim 1 of the new first auxiliary request and the new inventive step objection. In contrast, as a result of the amendments to claim 1 as granted, the board's understanding of the subject-matter of claim 1 of the new first auxiliary request was identical to how the subject-matter of claim 1 as granted was understood by the opposition division and the parties (see points 1. to 6. and 19. above; see also point 17. above). Consequently, the addition of feature 1I to claim 1 as granted, even if it occurred at a very late stage in the appeal proceedings, did not justify raising an inventive step objection based on a new combination of two documents. The board therefore exercised its discretionary power under Article 13(2) RPBA and did not take the new objection into account.

(d) Inventive step objection over document D1, D4, D6 or D8 in combination with either document D18 or D19

34. Documents D18 and D19 were cited for the first time in the statement of grounds of appeal mainly as evidence of the skilled person's common general knowledge (see section 4.6.5 "[i]n order to further illustrate the knowledge of the skilled person by the time of the invention"). The appellant did not present any convincing reason why it had not presented these documents, which were cited in the search report of the European patent application leading to the impugned patent, and the inventive step objections based thereon already in the proceedings before the opposition division. Further considering that common general knowledge is not normally established on the basis of the content of patent documents (see T 1540/14, Reasons 5), the board decided not to admit the inventive step objections starting from any of documents D1, D4, D6 and D8 in combination with document D18 or document D19, be it as separate prior art documents or as evidence of common general knowledge, into the appeal proceedings pursuant to Article 12(6), second sentence, RPBA.

(e) Inventive step objection over document D5 in combination with document D1

35. In view of the board's conclusion in point 43. below that document D5 does not qualify as a suitable starting point for assessing inventive step of the subject-matter of claim 1 of the new first auxiliary request, it could be left open whether or not the inventive step objection in view of a combination of documents D5 and D1 should have been admitted into the appeal proceedings.

Inventive step

(a) Document D8 in combination with document D9

36. New feature 1I further distinguishes the subject-matter of claim 1 from the method known from document D8. Only two different scan velocities (150 mm/s vs. 160 mm/s) are mentioned in the context of the DQ 250 housing in section 4.3.2 of document D8. There is no indication that the change from 150 mm/s to 160 mm/s occurs in accordance with a change in incidence angle of the laser beam. On the contrary, the scan velocity of 150 mm/s remains constant along the straight parts of the joint despite the continuous change in incidence angle.

37. The appellant argued that the geometry of the contact surface of document D8, when adapted in line with the teaching of document D9, would inevitably result in situations which lay outside the process window so that skilled person would have had to adapt the scan velocity correspondingly. The board notes, however, that neither document D8 nor document D9 links the scan velocity to the incidence angle. Moreover, the prior art documents do not even mention that the incidence angle is determined. Changing the scan velocity in accordance with the incidence angle would thus not have been obvious to the skilled person. Quite the opposite, it goes against the explicit disclosure of document D8 to use more than two different scan velocities along the welding path.

38. In view of the above, the subject-matter of claim 1 of the new first auxiliary request involves an inventive step over the combination of documents D8 and D9 (Article 56 EPC).

(b) Document D1 in combination with the common general knowledge

39. Document D1 is an industrial guideline entitled "Laser welding of thermoplastics" issued by the German Welding Society ("DVS") in 2005. In section 5.1.3 of the document, a method of quasi-simultaneous welding is described in accordance with features 1A to 1E of claim 1. The reference at the end of section 5.1.3 to three-dimensional welding contours implies that also contact surfaces having a three-dimensional structure can be welded (feature 1F), albeit by the combined use of multiple scanner systems. Regarding feature 1G, the example of Figure 24 on page 14 of document D1 concerns a lid welded onto a sensor housing by means of quasi-simultaneous transmission welding, wherein the geometry of the lid is such that the welding must have involved a laser beam with varying incidence angle.

40. The subject-matter of claim 1 of the new first auxiliary request thus differs from the disclosure of document D1 by the features 1H and 1I. Following paragraphs [0046] and [0071] of the patent, the board formulates the objective technical problem in agreement with the appellant as to provide a laser welding method that uniformalises the temperature distribution in the weld region.

41. The appellant argued with reference to sections 8.2.2.1 and 8.2.2.2 of document D1 that it would have been obvious to the skilled person to change the velocity of the laser beam with the incidence angle in order to average a heating temperature. Section 8.2.2.1, however, is concerned with contour welding, an alternative to quasi-simultaneous welding in which a kinematic system such as an articulated robot arm moves over or relative to three-dimensional surface geometries (see sections 5.1.1 and 6.4.1 of document D1). Controlling the laser intensity in function of the temperature by means of contactless pyrometry (see the last sentence of section 8.2.2.1) is thus only suggested for contour welding, not for quasi-simultaneous welding. The board concurs with the respondent that a pyrometer measuring the temperature in a particular point of the welding path would be of little use in case of a quasi-simultaneous welding method where the laser beam repetitively radiates over the weld region. Nevertheless, it is credible that the skilled person would have deduced from section 8.2.2.1 of document D1 that laser power is an important parameter in transmission welding. This is confirmed by section 8.2.2.2 which also mentions scanning velocity as an important set-up parameter ("Einstellparameter"). It is explained that, when using materials with low transmission, the laser intensity at high scanning velocity may not be sufficient to achieve melting in an acceptable process time. The board understands this to mean that both laser intensity and scanning velocity may have to be changed at the outset of the process in function of the properties of the light transmitting resin member. Yet this is not the same as adjusting these parameters during welding. A position-dependent velocity change cannot be deduced from section 8.2.2.2 of document D1, let alone that it hints at a velocity change in function of the incidence angle. Even if it is acknowledged that the skilled person had been aware of the underlying physics, the argument that the scan velocity would have been adjusted in order to compensate for a change in energy per surface area due to, for example, a tilted surface, whereas other parameters such as the laser intensity were to remain constant, is considered to be based on hindsight.

42. In view of the above considerations, the appellant has not convinced the board that the subject-matter of claim 1 of the new first auxiliary request does not involve an inventive step over document D1 in combination with the common general knowledge (Article 56 EPC).

(c) Document D5 in combination with document D1

43. Document D5 relates to a laser beam machining method with relative movement between a robot (see claim 1 of document D5) and the workpiece. Neither the embodiment of Figure 1 nor that of Figure 3 of document D5 discloses a welding method with the features 1A to 1E. The reference in paragraph [0005] of document D5 to "a welding technique, using laser beams" is made in the context of a discussion of the prior art and concerns a general description of laser transmission welding. Moreover, it follows from the advantage mentioned in paragraph [0008] that, similarly to the prior art discussed in paragraph [0010], the welding involves the use of a robot. A repetitive radiation of the laser beam on the weld region of the light absorbing resin member to heat and melt a whole of the weld regions simultaneously (feature 1D) is thus not disclosed. The board concludes that document D5 is not a suitable starting point for assessing inventive step of the subject-matter of claim 1 of the new first auxiliary request.

Conclusion

44. Having regard to the above considerations, the board concludes that the new first auxiliary request meets the requirements of the EPC so that the patent can be maintained as amended on the basis of this request pursuant to Article 101(3)(a) EPC.

Order

For these reasons it is decided that:

1. The decision under appeal is set aside.

2. The case is remitted to the opposition division with the order to maintain the patent on the basis of the following documents:

- claims 1 to 13, filed as new first auxiliary request by letter dated 16 January 2024;

- description and drawings of the patent specification.

Footer - Service & support
  • Service & support
    • Website updates
    • Availability of online services
    • FAQ
    • Publications
    • Procedural communications
    • Contact us
    • Subscription centre
    • Official holidays
    • Glossary
Footer - More links
  • Jobs & careers
  • Press centre
  • Single Access Portal
  • Procurement
  • Boards of Appeal
Facebook
European Patent Office
EPO Jobs
Instagram
EuropeanPatentOffice
Linkedin
European Patent Office
EPO Jobs
EPO Procurement
X (formerly Twitter)
EPOorg
EPOjobs
Youtube
TheEPO
Footer
  • Legal notice
  • Terms of use
  • Data protection and privacy
  • Accessibility