T 0089/89 27-03-1990

1. The appeal is admissible.

2. Admissibility of the amendments to Claim 1 proposed at the oral proceedings.

The amendments, consisting in correcting the two-part form of Claim 1 and clarifying the meaning of its last feature, which were proposed by the Appellant during the oral proceedings, do not have any relevance to the decision to be taken by the Board.

In particular, lack of compliance of the claims with the provisions of Rule 29(1) and Article 84 EPC is no ground for opposition under Article 100 EPC, and the proposed amendments cannot serve either to overcome the only ground of opposition which was still in dispute during the oral proceedings, namely the Respondents' allegation that the subject-matter of the patent did not involve an inventive step in the sense of Article 56 EPC. For, on the one hand, inventive step has to be assessed on the basis of the claimed features considered in combination, independently of whether they occur in the preamble or characterising portion of the claim. On the other hand, in the Board's opinion the question of whether a claim is clear in the sense of Article 84 EPC must be considered in opposition proceedings only if the patent proprietor has made amendments in accordance with Article 102(3) EPC, which was not the case when the amendments under consideration were proposed. Otherwise, the claim should be understood as it stands, and interpreted, where necessary, in the light of the description and the drawings (cf. the decision T 23/86 -3.4.1, OJ EPO, 1987, 316).

Accordingly, having regard in particular to the principle set forth by the Enlarged Board of Appeal in its decision GR 01/84 (OJ EPO, 1985, 299, point 9 of the Reasons) that the opposition procedure is not designed to be, and is not to be misused as, an extension of the examining procedure, and following also the findings in the decision T 295/87 - 3.3.1 (to be published, headnote published in OJ EPO, 1989, No. 10, point 3 of the Reasons) according to which amendments to the text of a granted patent during opposition proceedings should only be considered as appropriate and necessary in the sense of Rules 57(1) and 58(2) EPC and therefore admissible if they can fairly be said to arise out of the grounds of opposition, the Board regards the proposed amendments as inadmissible.

3. Novelty

3.1. Document D3 discloses with reference to its Figure 6 a Coriolis-type mass flow meter to be used in a flow line, said meter comprising a flow means (20) for having a fluid flow therethrough, in which said flow means is adapted to be vibrated by an exciting means (24,26) at 50% of the length of the flow means (D3', page 9, lines 12 to 16) in a direction normal to the flow direction (see the double arrow next exciting means 24 on Figure 6), and comprising means (28A,28B) adapted to detect the phase difference occurring between upstream and downstream parts of the flow means, at equal distances from the exciting means (as is apparent from the drawings and results also from the statement on page 3, lines 4 to 6 of D3' that the outputs for the two detectors are equal when no fluid is flowing), when subjected to vibration at a certain frequency ( ), and means (inlet port 29A and outlet port 29B) adapted to connect the flow means to the flow line, wherein furthermore the flow means comprises one straight tube which is clamped at its ends (into holding members 21A and 21B fixed to a base member 23; D3', page 9, lines 5 to 9).

Thus, the subject-matter of Claim 1 is distinguished from the device shown in Figure 6 of document D3 in that it comprises two straight parallel tubes instead of one straight tube only.

With respect to the additional distinguishing features relied upon by the Appellant (point V(b) above), the Board can see no significant difference either in the number of detectors, which anyway is not specified in Claim 1, or in the way the ends of the flow means are clamped in the sense of the claim. In particular, both in the flow meter described in the present patent and in that of document D3 two detectors are necessary to detect the vibrations of the straight tube or tubes at equal distances from the vibrating means, and a third detecting means must be provided for determining the phase difference between the outputs of said detectors. In addition, in the device of the present patent, the opposite ends of each straight tube are clamped into respective flanges (3, 3a) which are connected by a tubular portion shown only on Figure 2 and a central member comprising conical ends and which in the description is said to close the space between the tubes (column 2, lines 36 to 39). This mounting, accordingly, is equivalent to the mounting of the straight tubes of document D3 through holding members 21A and 21B and base member 23. In the absence from the specification and drawings of the present patent of any disclosure of a specific means for connecting the ends of the straight tubes to a flow line, the Board can find no basis in the patent for Appellant's submission that the clamped status of the ends of the tubes recited at the end of Claim 1 distinguishes its subject-matter from the device of Figure 6 of document D3 with respect to the manner in which these ends are connected to the flow line.

3.2. Document D6 describes a Coriolis-type mass flow meter to be used in a flow line (column 1, lines 6 to 17 and column 2, lines 24 and 25), said meter comprising a flow means for having a fluid flow therethrough (Figure 1 references 14, 14'; 18, 18'; 20, 20'; column 2, lines 21 to 25). The flow means is adapted to be vibrated by an exciting means at 50% of the length of the flow means in a direction normal to the flow direction (Figure 1; force coil 24 and magnet 25; column 4, lines 20 and 21).

The flow meter comprises means (Figure 1; sensors 43 and 44, flags 45 and 46) adapted to detect the phase difference occurring between upstream and downstream parts of the flow means at equal distances from the exciting means (Figure 1; column 5, lines 44 to 55), when subjected to vibration at a certain frequency (column 4, lines 22 to 27).

There are also provided means (Figure 1; inlets 15, 15' and outlets 16, 16') adapted to connect the flow means (14,14'; 18,18'; 20, 20';) to the flow line. The flow means comprises at least two parallel tubes (14, 14'; 18, 18'; 20, 20') which are clamped at their ends (column 3, lines 25 to 27: cantilevered or beamlike mounting of the tubes to a fix support).

Thus, the subject-matter of Claim 1 differs from the flow meter according to D6 in that the parallel tubes are straight tubes.

3.3. The remaining documents on file do not come closer to the claimed subject-matter.

3.4. For the above reasons, the subject-matter of Claim 1 is novel in the sense of Article 54 EPC.

4. Inventive step

4.1. The nearest prior art is in the Board's opinion constituted by the device disclosed in document D3 with reference to its Figure 6, as was agreed also by the Appellant at the oral proceedings.

The technical problem to which the distinguishing feature of Claim 1, namely the addition of at least a second straight tube to the single tube mass flow meter of document D3, is to improve its capacity to transport large amounts of fluid without unduly increasing the inner diameter of the measuring tube, which would in turn require that the tube length be unduly increased for maintaining a given sensitivity (description of the patent, column 1, lines 16 to 32).

4.2. The mere formulation of the above defined technical problem does not per se positively contribute to the assessment of inventive step, because the problem of avoiding the use of a large flow channel in a Coriolis- type mass flow meter was known in the art, and addressed in particular in document D6 (column 1, lines 13 to 17).

4.3. To this effect, document D6 teaches to define a plurality of flow channels for which the streams can be flowed either in one direction, in which case they are additively measured, or in opposite directions for differential flow measurements (column 2, lines 16 to 32). Straightforward application of this principle to the Coriolis-type flow meter of document D3, which immediately results in a device in accordance with Claim 1, does not in the Board's view involve an inventive step in the sense of Article 56 EPC.

In particular, contrary to Appellant's submission (point V(a) above), document D6 relates to a mass flow meter which operates on the same principle as the device of document D3, since it also involves mass flow measurement on the basis of the detection of phase differences occurring between the deformations of the flow means upstream and downstream from the exciting means, as is evident from the statement in column 5, lines 51 to 54 of D6, according to which time differences are determined between the instants in which the leading and trailing edges of the respective base legs move through the midpoint plane. In addition, a Coriolis-type mass flow meter including a single U-shaped tube which operates in the same way as that of document D6, except for the fact that it includes only one such tube, is presented in document D3 as "similar" to that comprising a straight tube (Figure 1 and D3', page 2, lines 8 to 11). Accordingly, the skilled person cannot reasonably be expected not to consider prior art documents relating to flow meters including U-shaped tubes such as document D6 when seeking specific improvements to the flow meter type comprising a straight tube disclosed in document D3.

The circumstantial evidence relied upon by the Appellant could not convince the Board that the claimed device involved an inventive step (point V(c) above) either.

For, on the one hand, the advertising material issued by the Appellant's competitors does not, as regards the solution to the Gordian knot, specifically refer to the multichannel construction of the described flow meter, which is the sole feature of the claimed device to distinguish it from the flow meter of document D3, but to features which have either been made available by this latter document, such as in particular the use of straight tubes and the direct obtaining of mass flow measurements independently of the volume or density of the transported medium, or form no part of the claimed invention, such as the dimensions of, and materials used for, the device.

On the other hand, document D3 was published only six months before the priority date of the present patent. Accordingly, there could not have existed before the date of the invention any longfelt want for an improvement in the capacity of the flow meter described in this document to transport large amounts of fluid, which is the objective technical problem addressed by the patent. In contrast to this, in the decision T 106/84 referred to by the Appellant, the Board was persuaded of the existence of a long-standing problem and this was a ground for it to recognise an inventive step in the simple technical solution there under consideration (point 8.6 of the Reasons).

5. For the above reasons, the subject-matter of Claim 1 is not patentable in the sense of Article 52 EPC and, accordingly, the grounds for opposition mentioned in Article 100 EPC prejudice the maintenance of the European patent.