T 0056/87 (Ion chamber) of 20.9.1988

European Case Law Identifier: ECLI:EP:BA:1988:T005687.19880920
Date of decision: 20 September 1988
Case number: T 0056/87
Application number: 81850075.3
IPC class: G01T 1/29
H01J 47/02
Language of proceedings: EN
Distribution:
Download and more information:
No PDF available
Documentation of the appeal procedure can be found in the Register
Bibliographic information is available in: DE | EN | FR
Versions: OJ | Published
Title of application: -
Applicant name: Scanditronix
Opponent name: Siemens
Board: 3.4.01
Headnote: The technical teaching in a prior art document should be considered in its entirety, as it would be done by a person skilled in the art. It is not justified to arbitrarily isolate parts of such document from their context in order to derive therefrom a technical information, which would be distinct from or even in contradiction with the integral teaching of the document. Thus, a technical feature which is derived from or based on dimensions obtained from a diagrammatic representation and which technically contradicts the teaching of the description, does not form part of the disclosure of this document.
Relevant legal provisions:
European Patent Convention 1973 Art 54
Keywords: Disclosure of features solely by a diagrammatic representation in a prior art document (no)
Catchwords:

-

Cited decisions:
-
Citing decisions:
T 0604/88
T 0150/89
T 0310/89
T 0486/89
T 0274/90
T 0466/90
T 0562/90
T 0768/90
T 0297/91
T 0365/91
T 0518/91
T 0718/91
T 0857/91
T 0657/92
T 1106/92
T 0005/93
T 0121/93
T 0136/93
T 0255/93
T 0964/93
T 0087/94
T 0219/94
T 0223/94
T 0244/94
T 0255/94
T 0347/94
T 0417/94
T 0663/94
T 0815/95
T 0912/95
T 0115/96
T 0139/96
T 0358/96
T 0492/96
T 0496/96
T 0717/96
T 0776/96
T 1004/96
T 0063/97
T 0300/97
T 0379/97
T 0488/97
T 0540/97
T 0680/97
T 0823/97
T 0844/97
T 0883/97
T 0963/97
T 1051/97
T 1110/97
T 0177/98
T 0255/98
T 0411/98
T 0414/98
T 0421/98
T 0515/98
T 0554/98
T 0686/98
T 0789/98
T 0941/98
T 1038/98
T 0103/99
T 0263/99
T 0359/99
T 1009/99
T 0100/00
T 0151/00
T 0338/00
T 0357/00
T 0635/00
T 0142/01
T 0421/01
T 0459/01
T 0935/01
T 1020/01
T 0479/02
T 0662/02
T 0963/02
T 0971/02
T 1164/02
T 0501/04
T 0924/04
T 1313/04
T 1080/05
T 1200/05
T 0707/06
T 0742/06
T 1967/08
T 0584/09
T 1122/09
T 0275/10
T 0456/10
T 0792/12
T 1716/13
T 0332/14
T 2220/14
T 1763/15

Summary of Facts and Submissions

I. The Appellant is owner of European patent 0 040 589 (application number 81 850 075.3). The patent comprises two claims, which are both independent and read as follows:

"1. A method of controlling a divergent beam of rays, said method comprising the steps of: (a) inserting a rotationally symmetric primary collimator (9) in said beam; (b) locating a transmission ion chamber (11) in said beam emerging from the primary collimator, said ion chamber including at least four flat inner ion trapping electrodes (15 to 18) located near the center of the ion chamber and at least four flat outer ion trapping electrodes (19 to 22) located near the periphery of the ion chamber; (c) positioning the inner electrodes so that said beam steadily strikes the whole surface of said inner electrodes; (d) positioning the outer electrodes so that said beam steadily strikes a first part of the surface of said outer electrodes, the remaining part of the surface of said outer electrodes lying in the shadow of the primary collimator; (e) deriving electrical signals from said inner and outer electrodes; (f) utilising said electric signals via control elements (3 to 6; 23 to 26) for correcting any deviation errors in the beam, i.e. any angular deviation of the beam in respect to the direction of rotational symmetry axis of the primary collimator, and for correcting any centering errors in the beam, i.e. any linear displacements of the beam in respect to said rotational symmetry axis with reference to the beam emission point (8), said step (f) being characterized by utilising the electric signals from the inner electrodes (15 to 18) for correcting said deviation errors in the beam and by utilising the electric signals from the outer electrodes (19 to 22) for correcting said centering errors in the beam.

2. A transmission ion chamber system for carrying out the method according to Claim 1, a rotational symmetric primary collimator being inserted in a divergent beam of therapeutic rays and said ion chamber (11) being located in said beam between the primary collimator (9) and a surface (12) to be irradiated with said beam, said chamber including at least four flat inner ion trapping electrodes (15 to 18) located near the center of the ion chamber and at least four flat outer ion trapping electrodes (19 to 22) located near the periphery of the ion chamber, the inner electrodes being positioned so that said beam steadily strikes the whole surface of said inner electrodes and the outer electrodes being positioned so that said beam steadily strikes a first part of the surface of said outer electrodes, the remaining part of the surface of said outer electrodes lying in the shadow of the primary collimator, said inner and outer electrodes emitting electrical signals which are fed to first and second control elements (3 to 6; 23 to 26) for correcting any deviation errors in the beam, i.e. any angular deviation of the beam in respect to the direction of the rotational symmetry axis of the primary collimator, and for correcting any centering errors in the beam, i.e. any linear displacements of the beam in respect to said rotational symmetry axis with reference to the beam emission point (8), said system being characterized by the fact that the electric signals from the inner electrodes (15 to 18) feed the first control elements (3,4; 23,24) which correct said deviation errors in the beam and that the electric signals from the outer electrodes (19 to 22) feed the second control elements (5, 6; 25, 26) which correct said centering errors in the beam."

II. The Respondent filed notice of opposition against the European patent and requested revocation of the patent in its entirety on the ground of lack of inventive step in view of the prior art disclosed, in particular, in the document: US-A-3 838 284(D1) and in view of the normal skill of the expert.

III. The Opposition Division revoked the patent on the ground of lack of inventive step in the subject-matter of the claims. It considered in particular that the positioning of the outer electrodes in the shadow of the collimator set out in step (d) of Claim 1 and in the corresponding part of Claim 2 was disclosed by Figure 1 of document D1, since it was easily seen that the prolongations of the generating lines defining the opening of the collimator as shown in the figure would intersect the outer electrodes of the ion chamber. Accordingly, the subject-matter of the claims was distinguished from the prior art disclosed in document D1 only by a different use of the respective signals from the inner and outer electrodes to achieve correct beam alignment, which use however resulted from an obvious choice between two possible alternatives only, one of which was already known from document D1.

IV. An appeal against this decision was lodged by the Proprietor of the patent.

V. Oral proceedings were held at the end of which the Appellant (Proprietor of the patent) requested that the decision under appeal be set aside and that the opposition be rejected. The Respondent (Opponent) requested that the appeal be dismissed.

VI. The Respondent supported his request essentially by the following arguments: (a) The essential feature of the present invention, which consists in positioning the outer electrodes of an ion chamber located downstream of a collimator in such a way that they partially lie in the shadow of the collimator, is already known from document D1. In particular: (i) Figure 1 of document D1 shows a device in which the outer electrodes and the collimator are arranged in the claimed way, as may be ascertained without using a scale nor making any special measurements simply by prolonging the lines of the figure which define the inner opening of the collimator. (ii) Although it is acknowledged that this Figure is purely diagrammatic, the skilled person normally assumes that it correctly reproduces at least the general proportions and relative positions of the essential parts of the device. (iii) The statement in document D1 that the outer set of radiation responsive electrodes is to be placed "at positions to monitor the extreme edges or shoulders, of the photon field" (column 2, lines 43 to 47) would confirm, if need be, this obvious interpretation of the Figure. (b) Accordingly, the claimed invention is distinguished from the subject-matter of document D1 only by the features directed to a specific use of the inner and outer electrodes for respectively correcting angular and lateral alignment errors of the beam. These features however cannot positively contribute to an assessment of inventive step, for the following reasons: ...

VII. These arguments were contested by the Appellant who made essentially the following submissions: (a) The shadow condition set out in the claims is not disclosed by the content of document D1 since, in particular: (i) There is no mention whatsoever in the description of document D1 suggesting the use of the shadow of the collimator for improving beam alignment. (ii) The document D1 requires explicitely that the outer electrodes shall be disposed in the radiation field (see for example, abstract, lines 11 to 14). Such a disposition excludes the use of a construction in which the electrodes would be partially shadowed by the collimator. (iii) Document D1 discloses in fact a method according to which the outer electrodes are disposed at positions to monitor the extreme edges, or shoulders, of the photon field in order to measure the tilt of the radiation lobe (column 2, lines 43 to 47; column 5, lines 18 to 21). A tilt measurement would however not be possible if the outer electrodes were located partially in the shadow of the collimator, because such positioning selectively amplifies the error signal component which is due to lateral misalignment and consequently impairs the detection of angular errors. (iv) The shadow condition set out in the present claims can only be derived from document D1 by using a ruler and measuring an angle on the schematic representation shown in Figure 1, which therefore does not provide an effective disclosure of the disputed features, as ruled already in the decision T 204/83 (OJ EPO, 1985, 310). The skilled person would see no more than a pure coincidence in the fact that notional extensions of the lines which in Figure 1 define the internal opening of the collimator intersect the outer electrodes, the more so since the respective intersections lie at a distance of less than 1mm from the edges of the outer electrodes. (b) The subject-matter of the claims involves an inventive step in view of document D1 since: ...

Reasons for the Decision

1. The appeal is admissible.

2. The Board is satisfied that the patent in suit discloses the claimed subject-matter in a manner sufficiently clear and complete for it to be carried out by a person skilled in the art. The Board regards a skilled person to be able to figure out without the exercise of any inventive activity, the correlation between lateral and angular alignment errors and the corresponding signals supplied by the respective sets of electrodes, when disposed as defined in the patent. Moreover, this correlation can as well be derived from the performance of simple routine tests. Adequately using such correlation for controlling the beam via the electrode signals to minimize alignment errors cannot be considered to go beyond the normal competence of the specialist in the field of beam control.

3. Novelty

3.1 Document D1 undisputedly discloses a method for controlling a divergent beam of rays, which comprises the steps (a) to (c), (e) and (f) as set out in the preamble of present Claim 1, and over which the claimed method distinguishes at least in that the electric signals from the inner electrodes are used for correcting (angular) deviation errors while those from the outer electrodes are used for correcting (lateral) centering errors as set out in the characterising portion of the claim, in contrast with the opposite utilisation of the respective electrode signals as disclosed in document D1 (column 4, line 57 to column 5, line 24). Neither does document D1 in the Board's view anticipate step (d) of the claimed method, according to which the outer electrodes of the ion chamber are partially located in the shadow of the primary collimator, since, as set out in detail below, there can be seen no disclosure of these features in the mere fact that, in the schematic view shown in Figure 1, the segments representing the outer electrodes lie in the prolongations of the lines which represent the inner surface of the primary collimator. It is generally accepted that for deciding on the novelty of a feature claimed in a patent or in a patent application it is necessary to determine whether this feature may be derived directly and unmistakenly from a prior art document by a person skilled in the art (see point 4 of decision T 204/83 already mentioned). In the Board's opinion, the skilled person who studies a document does not consider individually the various single items described therein but looks at their technical interrelation in order to try to understand the functioning of the disclosed apparatus or process. The skilled person is thus used to seeing all the detailed information contained in a document in their technical context. Therefore, the technical disclosure in a prior art document should be considered in its entirety, as it would be done by a person skilled in the art. It is not justified arbitrarily to isolate parts of such document from their context in order to derive therefrom a technical information, which would be distinct from or even in contradiction with the integral teaching of the document. In the present case it is not questionable that Figure 1 of document D1 is practically identical with Figure 1 of the patent in suit at least as far as the arrangement downstream of the target is concerned. It has also not been disputed that these figures are purely schematic views drawn to illustrate "in basic form, a high energy X- ray system" (cf. document D1 col. 3, line 34). It would equally be immediately apparent to the skilled technician that the proportions and dimensions shown in Figure 1 of document D1 do not at all correspond to those of known apparatus used in practice. In particular he would be aware of the fact that the scale of the diagram is contracted in beam direction. Already for these reasons the skilled technician would need to refer to the other figures and to the written description of document D1 in order to be able to interpret its Figure 1. When reading this document, the skilled technician learns that a method is proposed for controlling the alignment of a charged particle beam which consists in : (a) measuring the tilt of the lobe of the radiation beam by placing an outer set of radiation responsive electrodes at positions to monitor the extreme edges, or shoulders, of the photon field (col. 2, lines 43- 48); (b) detecting changes in the position of the lobe by means of a separate set of inner electrodes to measure radiation passing through the steepest slope of the flatness filter (col. 2, lines 48-51); (c) applying the signals developed by each set of electrodes to a corresponding positional servo mechanism (col. 5, lines 64-68 and col. 6, lines 1-13). The Board agrees with the Appellant's view that the skilled technician would deduce from the above summarised disclosure that the outer electrodes have to be entirely in the radiation field in order to be able to detect the change in intensity due to the tilt of the lobe without any influence of the collimator. A collimator shadow on the outer electrodes would enhance their signal component due to lateral misalignment and thus make the integral signal output from the outer set of electrodes less effective in controlling the angular alignment coils, to which they are connected. The Board considers consequently that Figure 1 of document D1 interpreted, as it should be, in the light of the written text of this document does not disclose the feature (d) of Claim 1 of the patent in suit according to which the outer electrodes are partially shadowed by the collimator. Moreover, contrary to the Respondent's view summarised in point IV (a) (ii) above, the Board is convinced that the partial shadowing of the outer electrodes can only be derived from Fig. 1 by interpreting apparent dimensions of a diagrammatic representation. Thus, a technical feature which is derived from or based on dimensions obtained from a diagrammatic representation and which technically contradicts the teaching of the description, does not form part of the disclosure of this document.

3.2 The remaining prior art documents cited during the examining or opposition procedures do not come closer to the subject-matter of Claim 1.

3.3 For these reasons, the subject-matter of Claim 1 is considered to be novel within the meaning of Article 54 EPC.

4. Inventive step. ...

ORDER

For these reasons, it is decided that:

1. The appealed decision is set aside.

2. The opposition is rejected.

Quick Navigation