T 0066/97 09-01-1998

1. Admissibility

The appeal is admissible.

2. Articles 84 and 123(2) EPC

Claim 1 now under consideration is based on original claim 1 including minor amendments of clarifying nature (inter alia explicitly specifying the hermetic layer to be electrically conductive as disclosed at page 1, third paragraph of the description as filed) and having two additional "negative" features of disclaimer type inserted at its end after "aerial discharge".

These additional features are disclosed at page 3, second paragraph, page 4, last-but-one paragraph and page 6 of the original application documents. As can be seen from Figure 4 and associated text on pages 5 and 6 of the present application, the last feature of claim 1 relating to the suppression of an electric current in the optical fibre surface during fusion and connection must be regarded as essential for achieving the claimed effect (see item 5.3 below).

The Board considers the use of "disclaimer type" features to be justified in the present case since these features have been originally disclosed (i.e. are not genuine "disclaimers" which, in general, are introduced after the filing date to establish novelty with respect to the closest prior art), have a clear technical meaning and in view of the rather concise original disclosure cannot be expressed in a positive way without a risk of offending against Article 123(2) EPC.

Dependent claims 2 and 3 correspond in substance to original claims 2 and 3. Hence, the Board is convinced that the amended version of claims is clear, supported by the description and admissible under Article 123(2) EPC.

3. Formal requirements

In the present case relating to a method of connecting a pair of optical fibres, the one part form of claims appears to be preferable (Rule 29(1) EPC). Moreover, reference numerals are not considered necessary to render the subject matter of the claims more intelligible (Rule 29(7) EPC).

4. Novelty

None of the pre-published documents D1 to D5 discloses a method of connecting a pair of hermetic optical fibres without removing the hermetic layer prior to the aligning and fusing and connecting steps. These documents either do not relate to hermetic optical fibres at all (D1 and D4) or the hermetic layer is removed before fusion splicing (D2, D3 and D5).

Since the priority claimed in the present application must be regarded as valid, non-prepublished Document D6 could only fall under Article 54(3) EPC for the "overlapping" contracting states FR and GB, depending on the validity of the multiple priorities claimed in said document. In any case, document D6 does however not anticipate the subject matter of claim 1 since it suggests an alternative solution relying on the presence of a specific inert gas atmosphere and not on surface current suppression as is the case in the present application.

Thus, the subject matter of claim 1 is considered to be novel with respect to the available prior art (Article 54 EPC). This finding has, in fact, not been challenged during examination proceedings.

5. Inventive step

5.1. In the Board's view, a correct application of the problem-and-solution approach should be based on document D2 (or similar documents D3 and D5) as closest prior art, and not on document D1 as has been done by the Examining Division: the former document already relates to a method of connecting hermetic optical fibres by an aerial discharge and to the problem of reduced break strength arising in this context due to the interference of the hermetic layer with the fusion process (see D2, column 2, lines 5 to 52). Document D1 does neither make reference to hermetic optical fibres nor, not surprisingly, to any fusion problems caused by the presence of hermetic layers. Therefore, it cannot be considered as a technically realistic starting point (see the decisions cited as examples in "Case Law of the Boards of Appeal of the European Patent Office", EPO 1996, Chapter I, D-3.2: "Choice of the closest starting point").

From document D2, there is known a method of connecting a pair of hermetic optical fibres having an electrically conductive hermetic layer coated on optical fibre glass, which comprises positioning the optical fibres on respective optical fibre holders, aligning the cores of the optical fibres and fusing and connecting the optical fibres through an aerial discharge (see D2, Figures 1 and 2 and associated text).

In particular, it appears from said document that the above-mentioned difficulties of splicing hermetic optical fibres can be satisfactorily avoided by removing the hermetic coating before fusion and connection (see D2, column 3, first paragraph).

5.2. The subject matter of claim 1 differs from this prior art in that

- the respective fibre holders are electrically nonconductive V-shaped grooves,

- said aligning and fusing and connecting steps are performed without removing the hermetic layer, and

- without passing an electric current in the optical fibre surface during the fusion and connection.

5.3. The claimed method thus aims at a simplification of the prior art process while still guaranteeing high strength connections (see page 3, first and second paragraphs of the present application as filed). Hence, the corresponding technical problem of achieving this object is of standard type and as such cannot contribute to patentability.

The claimed solution consists substantially in leaving the hermetic layer in place during the alignment and fusion steps while keeping the hermetic optical fibres electrically isolated, inter alia by utilising electrically nonconductive V-shaped grooves.

5.4. Although the Board considers electrically nonconductive V-shaped grooves as such to be conventional (see document D4 disclosing a ceramic V-groove fibre holder in which the discharge electrodes are directly inserted, i.e. the ceramic holder must be nonconductive to avoid short-circuits; or document D1 relating to a ceramic base for fusion splicing of optical fibres supported by V-grooves, the base being formed of alumina ceramics or, preferably, partially stabilised zirconia, i.e. materials which are clearly nonconductive), the prior art cited in this context does not specifically deal with hermetic optical fibres nor address any specific splicing problems due to the presence of a conductive hermetic coating during the fusion process as has already been pointed out above.

Therefore, in view of the technical problem posed a skilled person would not consider this prior art at all or, in any case, would not expect a contribution to the solution of the present problem from this prior art.

However, even if electrically nonconductive V-shaped grooves were taken into consideration for connecting hermetic optical fibres (in accordance with the assumptions of the Examining Division when selecting document D1 as closest starting point), then, in the Board's view, a skilled person would remove the hermetic layer prior to the fusion step. This is because there is no indication in the available prior art that satisfactory splicing of hermetic optical fibres may be carried out without such removal. On the contrary, all of the prepublished documents explicitly dealing with hermetic optical fibres, i.e. documents D2, D3 and D5, emphasise the necessity of hermetic layer removal in order to achieve a satisfactory break strength (see D2, column 5, lines 52 to 56; D3, the abstract; D5, page ECOC'90-603, 7. Conclusion).

Finally, as can be seen from Figure 4 and associated text of the present application, the mere provision of electrically nonconductive V-shaped grooves would not be sufficient to guarantee a reliable solution of the above technical problem. Rather, any electric current in the coated optical fibre surface must be avoided during the fusion and connection step. The available prior art is completely silent in this respect.

5.5. In consequence, the Board does not consider the subject matter of amended claim 1 to be obvious from the prior art identified (Article 56 EPC), and claim 1 is thus allowable.

6. Dependent claims and description

Dependent claims 2 and 3 concern particular embodiments of the claimed subject matter and are therefore also allowable.

The description has been adapted to the amended version of claims and meets the requirements of Rule 27 EPC. On page 5, the insertion "as shown in Figure 3" has been amended with the appellant's consent to read "as shown in Figure 4".

7. Auxiliary request

Since the decision is in accordance with the appellant's request, the auxiliary request for oral proceedings is to be disregarded.