T 0090/02 (Selectively encrypting or decrypting/CONTROL LOGIC) 29-09-2004

1. With respect to the main request, the respondent raised objections of lack of clarity, added subject-matter, insufficient disclosure, and lack of an inventive step. The first three of these objections all arose from the formulation of the subject-matter of claim 1 that "the configuration storage memory (27) is instructable to ... convert the coded digital output signal produced by the processor (24) ... to conform to any one of a number of predetermined protocols", and the equivalent in claim 15. Understood literally, this meant that the configuration storage memory must itself carry out some kind of processing after the encoding or decoding processing performed by the processor. In consequence a clarity objection arose because it was not clear how this processing could take place. Further, the processing was not disclosed in the application as filed, leading to the further objections of added subject-matter and, since the skilled person would not know how to carry it out, insufficiency of disclosure. A similar point arose with respect to claim 15, the independent method claim.

2. The feature objected to was included in the independent claims as granted. According to the established case-law of the Boards of Appeal an alleged lack of clarity in a claim, where that lack of clarity does not arise from amendments to that claim in the proceedings after grant, does not constitute grounds for rejecting the claim, since lack of clarity is not a ground of opposition. This objection therefore fails.

3. Equally, since this feature was present in the independent claims as granted, the objection that the invention is not disclosed in a manner sufficiently clear and complete for it to be carried out by a person skilled in the art must be seen as an objection under Article 100(b) EPC. However, this ground for opposition was not considered in the opposition proceedings. As decided in decision G 10/91 (OJ 1993, 420, see point 3 of the Opinion), a board may consider fresh grounds for opposition in appeal proceedings only with the approval of the patentee. In the present case, the appellant (patentee) did not approve the introduction of the new ground.

4. Article 100(c) EPC was considered in the opposition proceedings and the objection of added subject-matter in the patent as granted is therefore not a new ground of opposition. Hence it must be considered on its merits. The board considers that the skilled person would reject a literal reading of the claim as not technically credible, since the usual function of a memory is to store data, not to process it. The skilled person would therefore seek to interpret the claims in the light of the description, from which it would be clear that the feature as claimed is an abbreviated formulation of the memory containing an indicator of the protocol to be used, and the processor responding to this indicator by carrying out, or causing the I/O port to carry out, the appropriate conversion. The skilled person would also deduce this feature from the application as filed. Thus the feature as claimed does not extend beyond the content of the application as filed.

5. With regard to the question of whether the subject-matter of claim 1 involves an inventive step, it was common ground between the parties that of the cited documents D1 represented the closest prior art. D1 discloses an electronic coding device in the form of an (e.g. bank) terminal, which maintains contact with a central host system including a database, and into which a user's chip card is inserted. Communications with the host system are encrypted using the DES system, and data sent to the chip card is also encrypted using RSA (DES and RSA being two well known encryption methods). Figures 4A and 4B together show a structural diagram of the terminal including DES encryption, DES decryption and RSA encryption units (84, 85. and 82 respectively). Further, in order to deal with a variety of standards of user's cards, the terminal has a "main controller" or processor 77 which obtains a collection of data from the inserted card, the so-called "answer-to-reset" data, which then determines the parameters of the communication between terminal and card (e.g. the maximum voltage used by the terminal). It is thus arguable that the terminal converts its coded digital output signals to the card to conform to any one of a number of predetermined protocols, in the terms of the patent in suit. Moreover, as a step in the protocol adaptation of the terminal to the card, the obtained data are stored in a memory, the "initial parameter RAM" 76. Thus it is also arguable that this is a configuration storage memory as specified in claim 1 of the patent in suit.

6. However, D1 does not disclose the use of a configuration memory to select one of an encryption and a decryption algorithm. The respondent argued firstly that the skilled person would appreciate that Figure 4 of D1 in fact merely laid out the functions carried out by the terminal, and that in reality these functions would be implemented in a microprocessor. Alternatively, even if the various "arithmetic units" were actual hardware modules in the terminal, they were clearly under the control of "main controller" 77. In either case, the controller or processor would necessarily or at least obviously store data, in the form of a flag or similar, to indicate which of the operations of encryption and decryption should currently be carried out. It would further be obvious to store this data in the RAM with the output protocol data.

7. The board does not find these arguments convincing. In contrast to the invention in the patent in suit, in D1 there is no need to instruct the processor whether to encrypt or decrypt arriving data since the function to be performed is determined simply by its origin. For example, referring to Figure 4, all data received at I/O controller 86 comes from the host. All data received from the host system must be decrypted using the DES algorithm in unit 85. Even if the system were implemented as software running in a general- purpose microprocessor, the system would typically respond to incoming data simply by invoking a software module to decrypt the data (and carry out any other standard processing for incoming data). There would be no need to set "configuration" data to tell the microprocessor what to do. That would be determined simply by the fact that the software module was running. Indeed there seems to be nothing in D1 excluding both encryption and decryption taking place concurrently, whether this be realised by separate hardware units or by multi- tasking in a processor. A "configuration" of the system to carry out just one of these tasks at a time would seem to be undesirable.

8. Thus the respondent has not identified anything in the disclosure of D1 which would lead the skilled person in the implementation of the system disclosed therein to use a configuration storage memory to store data instructing the selection of one of a predetermined encryption and a predetermined decryption algorithm.

9. The respondent also suggested that the combination of selectable features in a system was in itself commonplace, and that if the skilled person wanted to provide a selection of one of encryption and decryption in D1, it would be obvious to do so by adding to the data in the initial parameter RAM 76 an indication of which was to be selected. However, the respondent has not identified any motivation for the skilled person to provide such an option and in any case the skilled person would in fact be actively discouraged from doing so. Each of the encryption and decryption functions in D1 has a specific purpose; selecting one of them would mean disabling the other, so that the system would be unable to function properly.

10. Document D2 also discloses a system having a memory used for storing data which determines the appropriate protocols to use in communicating with (in this case) a plurality of external devices. However, it does not discuss data encryption or decryption at all, and therefore cannot supply the missing motivation to provide a selected one of these processes.

11. The board accordingly concludes that the subject-matter of claim 1 involves an inventive step having regard to the disclosure of D1 and D2.

12. Claim 15 concerns a method used to enter the configuration data, including the encryption / decryption selection data, in the configuration storage memory. Since no motivation for the skilled person to provide such a configuration has been identified, there is equally no motivation to supply a method of carrying out the configuration and the above conclusion with regard to claim 1 also applies to this claim.

13. Thus none of the objections raised by the respondent against the subject-matter of the claims of the main request are convincing. No objection was raised against the description as amended finally in the oral proceedings.