T 0751/89 04-09-1990

1. The appeal is admissible.

2. There is no objection to the claim as far as Article 123(2) EPC is concerned.

3. Novelty

3.1. From document D4 (in particular Figure 1 with the corresponding description) there is known, as admitted by the Appellant, a charge coupled device as defined in the precharacterising part of Claim 1; see the charge transport channel (register) 6; theclock electrodes 8 to 11; the means for supplying the clock voltage at 27 to 30; the separate row of charge storage means 20; and column 8, lines 32-35 in combination with Figures 4A to 4D at transfer time 2 with regard to the voltage supply to the clock electrodes during the introduction of charge packets into the charge transport channel, wherein potential wells are mutually separated by potential barriers.

The subject-matter of Claim 1 differs from this prior art in the read-out mechanism defined in the characterising part of Claim 1. The prior art device does not use the "accordeon" technique but transfers each second charge packet from a first transport channel into a second transport channel and thereafter simultaneously reads-out serially both channels in a conventional way, i.e. with an empty potential well between each charge packet to be transported right from the beginning of the read-out step, whereas in the "accordeon" technique said empty potential wells are successively created during the read-out steps itself.

3.2. The charge coupled device known from document D3 makes - not contested by the Appellant - use of the "accordeon" read-out technique as defined in the characterising part of Claim 1, but differs from the subject-matter of Claim 1 in a feature claimed in its preamble: The known "separated row of charge storage means" (i.e. a column of the A- register of Figure 10 of D3) is not connected to the charge transport channel (i.e. a column of the B-register) "by a number of parallel inputs", but serially by only one input. Hence, the mutual geometrical configuration of said "separated row of charge storage means" (pixels) and said "charge transport channel" is different in the present patent application and in the known device. In the prior art known from document D3 the separated row of charge storage means (pixels) does not face in parallel its related charge transport channel but lies in line with it. This geometrical arrangement is part of a frame transfer type device, wherein the "accordeon" read-out technique is used to vertically transfer charges from a two dimensional pixel array (A-Register) into a two dimensional storage array (B-Register) and from this storage array into a linear shift register (C-Register), whereby individual rows of the stored information are subsequently read-out horizontally, forming the video signals for the subsequent rows on a television screen (D3, column 5, line 66 to column 6, line 5).

3.3. ESR-document EP-A-0 128 615 (D2) and document EP-A-0 106 286 (D1) cited by the Examining Division represent a prior art according to Article 54(3) EPC. The devices described in both said documents have no charge transfer channel with a plurality of parallel inputs.

3.4. The subject-matter of Claim 1 is, therefore, novel in the sense of Article 54 EPC.

4. Inventive step

4.1. Starting from the nearest prior art as described in document D4, the objective problem underlying the present application is to indicate an alternative way of realising an increased resolution in the transport direction of a charge transport channel in a charge coupled device, which channel has a multitude of parallel inputs. The Board cannot follow the Appellant's views (see point VI-1) that an already solved technical problem excludes any subsequent attempt of an expert to solve this known problem in a different way. The Board is rather convinced that in practice the search for alternative solutions is part of a skilled person's normal routine activities. In particular, an existing solution of a technical problem in the Board's opinion is no reason for an expert not to observe further on the progressing technical development of his own field. It is, on the contrary, held to be one of the usual tasks of an expert who works in a developmental department to test for his own purposes the usability of new alternative techniques recently developed in his particular technical field for some different purpose. An expert can, furthermore, be expected to apply a known alternative in analogous situations, if this application appears desirable to him for reasons which result from needs of the industrial practice. Moreover, the Board follows the permanent jurisdiction of the Boards of Appeal when regarding it as obvious to relate two technical teachings with one another if they are both known in the same technical field; see point VI-1 above.

4.2. The Appellant is followed in his view that in the device known from document D3, the "accordeon" read-out technique is used in order to increase the vertical resolution (within a column of a two dimensional display). However, in the Board's opinion this particular technical purpose does not prevent a skilled person from recognising that the "accordeon" read-out technique is a technical means for increasing the resolution in the transport direction of the charge packets in the charge transport channel of a register independently from the fact whether this transport direction is vertical or horizontal; see point VI-2 above.

4.3. In the fact that for the read-out step of the C-Register in the device known from document D3 the "accordeon" technique is not applied - see point VI-3 above - the Board can neither see a prejudice nor a technical difficulty that would prevent a skilled person from understanding that this technique can be effectively applied also when the transport direction of the charge packets is turned by 90 degrees. An expert will rather explain the use of the conventional read-out fashion of the C-Register by the need to read-out the row-information of this register within part of the horizontal line time of television (see document D3, column 5, line 66 to column 6, line 5), the conventional simultaneous serial read-out being quicker than the "accordeon" technique (see document D3, column 2, lines 65-67).

4.4. Furthermore, the Board regards a skilled person to be able to deduce from document D3 that the functioning of the "accordeon" read-out technique is not at all influenced by any measures and means which effect the charge packet transport into each neighbouring potential well of the transport channel before the start of the "accordeon"-like read-out. In the Board's opinion, a skilled person will find out without any difficulties that the charge packet distribution at the end of transfer time 2 in the device of document D4 with potential wells and charge packets under clock electrodes 9 and 11 (Figures 4B and 4D of document D4) and with potential barriers under clock eletrodes 8 and 10 (Figures 4A and 4C of document D4) is analogous to and compatible with the charge packet distribution in register B of document D3 at time "tD" in Figure 11. On the basis of the above facts, a skilled person will recognise that the "accordeon" read-out technique according to document D3 and the second transport channel (7) according to document D4 represent equivalent technical means as far as higher resolution is concerned. The necessary measures for an interchange of said known equivalents in the device known from document D4 are self-evident to an expert. Also the Appellant has put forward no technical facts demonstrating that it would surpass a skilled person's normal abilities to keep gate 31 of the device according to document D4 closed, to provide means for supplying to its clock electrodes 8 to 11 the potential supply programme of shift register 86 in Figure 10 of document D3, to find out that gate 31, paths 33 and register 7 in Figure 1 of document D4 lose their function and, consequently, to omit them; see point VI-4 above.

4.5. For the reasons set out above, the Board considers the skilled person able to see that the "accordeon" read-out technique described in document D3 and the second transport channel (7) used in the device known from document D4 represent equivalent measures with regard to an increase of the resolution of a register in transport direction of the charge packets. Other known properties of the "accordeon" technique - such as for instance its longer read-out time - lead to foreseeable consequences which a skilled person may accept. The arrival at the subject-matter of Claim 1 by an interchange of both these equivalents produces neither surprising effects nor technical difficulties and is, therefore, held to be obvious to a person skilled in the art.

4.6. Therefore, in the Board's judgement, the subject-matter of Claim 1 lacks an inventive step within the meaning of Article 56 EPC.

5. As set out above, Claim 1 is not allowable with regard to Articles 52(1) and 56 EPC. Claims 2 and 3 are not allowable either, since they are dependent on unallowable Claim 1.