T 1757/15 15-10-2019

Main request

1. Claim 1 does not meet the clarity requirement of Article 84 EPC.

1.1 The feature "wherein, in the manufactured exhaust gas purifying apparatus, a longer side face of each layer of the holding sealing material and the end face of the exhaust gas treating body are substantially parallel to each other at both of a press-fitting side end portion (20a) and an end portion (20b) on the opposite side of the press-fitting side end portion (20a) of the exhaust gas purifying apparatus (20)" was added to the claim during the proceedings before the opposition division. This feature is not defined in the originally filed or granted claim. Rather it is based on the description (see for example paragraph 31). The amendment may therefore be examined for compliance with Article 84 EPC (G 3/14, OJ EPO 2015, 102). This was not disputed by the appellant.

1.2 The cited feature defines the properties of the final product to be obtained by the claimed manufacturing method. However, it is not clear which further method step or further detail of the previously defined (and uncontestedly known) method steps of a manufacturing method are implied by this feature of the resulting manufactured product. Thus, the feature of the final product merely defines a result to be achieved, without defining which method step (or steps) allow this result to be achieved.

1.3 Contrary to the opinion of the appellant, the Board finds that the added feature does not constitute a functional feature of the claimed manufacturing method. A definition by a functional feature would require that a method step is defined in terms of the function it is to provide in such method. The added feature here is however not a method step at all, but rather simply a property of a final product obtained by the manufacturing method. Therefore the appellant's argument that the feature was in some way a functional feature is not accepted; no "function" is defined.

1.4 The appellant also argued that all steps are already defined in the claim and that the wording of the added feature should be understood to mean that the preceding method steps should be performed by selecting the properties of the mat-shaped holding sealing material and the parameters of the winding and press-fitting steps in some way so as to obtain a final product having the defined property. Notwithstanding the fact that the amendment is not worded in this way anyway, the Board also does not accept this argument as there would still be no indication (not even in the description in fact) of how the skilled person should perform the two method steps.

2. Since the clarity requirement of Article 84 EPC is not met, the main request is not allowable.

First auxiliary request

3. The first auxiliary request was submitted as the tenth auxiliary request in reply to the preliminary opinion of the Board, thus after the time limit for filing the appeal grounds (Article 12(1) and (2) RPBA). It therefore constitutes an amendment to the appellant's case under Article 13 RPBA.

According to Article 13(1) RPBA, any amendment to a party's case may be admitted and considered at the Board's discretion. The discretion shall be exercised in view of inter alia the complexity of the new subject-matter submitted, the current state of the proceedings and the need for procedural economy.

In order to be in line with the requirement of procedural economy, amendments should be prima facie allowable in the sense that they at least overcome the objections raised against previous requests without giving rise to any new ones.

4. The amendments to claim 1 in the first auxiliary request were filed in order to remedy the clarity objections raised by the Board in its preliminary opinion. Although the amendments overcome the former clarity objection, they however introduce a new objection under (at least) Article 123(2) EPC.

4.1 The basic principle when examining whether the requirement of Article 123(2) EPC is met, is to be found in the jurisprudence of the Enlarged Board of Appeal which was summarised and confirmed in its decision G 2/10 (OJ EPO 2012, 376, Reasons 4.3).

Applied to the present case, it has to be established whether the amended subject-matter is directly and unambiguously derivable by a skilled person, using common general knowledge, and seen objectively and relative to the date of filing, from the whole of the document (i.e. description, claims and figures) of the application as filed (n.b. reference is made here and in the following to the published application).

4.2 The added feature, concerning the fixation of the outermost layer and the adjacent inner layer with a fixing member after the completion of the winding, is literally based on paragraph 139, lines 13/14, of the description. Lines 17 to 19 explain the purpose of the fixation. On the one hand, the fixation "makes it easy to maintain a state where the holding sealing material is wound around the exhaust gas treating body". This purpose may be considered to be implicit in the added feature. The further purpose disclosed in these lines, "improving a handling property of the exhaust gas treating body in the press-fitting process into the casing", implies the fixation to persist in the press-fitting step. This purpose is however not defined in claim 1, neither explicitly nor implicitly in the added feature, nor in the remaining features of claim 1. The amended claim leaves it entirely open as to whether the fixing member is temporarily provided - for example, for an intermediate storage or for transport of the wound components between different working stations, for later press-fitting in the casing - and is later removed before the actual press-fitting step is carried out, or whether the fixing member remains present during the press-fitting step, as disclosed precisely in lines 18/19 in paragraph 139. At least for the reason that a limitation corresponding to the presence of the fixing member during the press-fitting step has not been included in the claim, the resulting combination of features is not directly and unambiguously derivable from the application as filed and consequently extends beyond the content of the application as filed, contrary to the requirement of Article 123(2) EPC.

4.3 The Board's conclusion is not altered by the appellant's argument that the original and granted claim also covered manufacturing methods in which fixing members could be applied only temporarily and be removed before the press-fitting. The Board considers that the combination of features resulting from original and granted claims 1, 2 and 13, has been complemented by features disclosed in the description only in the context of a particular manufacturing method, namely one in which, specifically in the press-fitting step, a fixing member provides for improved handling properties. This necessarily implies its continued presence in this step. The appellant did not indicate any other disclosure in the original application documents disclosing a manufacturing method in which a fixing member used for fixing the outermost layer to an adjacent inner layer of a wound holding sealing material is disclosed in a more general context, nor could the Board find any itself.

5. Since the amendments according to the first auxiliary request give rise to a new objection under Article 123(2) EPC, they are not prima facie allowable in the sense set out above (point 3). The Board thus exercised its discretion according to Article 13(1) RPBA not to admit the first auxiliary request into the proceedings.

Second auxiliary request

6. For similar reasons the Board also did not admit the second auxiliary request into the proceedings (Article 13(1) RPBA).

6.1 Although amended claim 1 was further limited to remedy the previous objection, the resulting subject-matter is still not directly and unambiguously derivable from the application as filed. The description of the application discloses as an overall aim to be obtained by the manufacturing method disclosed therein, to provide parallel (in the sense of being "flush") end faces of the wound mat-shaped holding sealing material in the final exhaust gas purifying apparatus. This is required in order to reduce the risk of wind erosion (see e.g. paragraph [0010]). For this to be achieved, the individual layers, which initially are spirally wound with a defined shift around the treating body, have to move relatively to each other during the press-fitting step so as to compensate for the initial shift as explained in, for example, paragraph 54. Paragraph 54 is important in this context, since it relates specifically to original claim 13 which constitutes, together with original claims 1 and 2, the basis for present independent claim 1 directed to such manufacturing method. Accordingly, also the disclosure in paragraph 139, on which the amendments to present claim 1 are based, would necessarily be understood by the skilled person in the context of this general purpose disclosed already in paragraph 54, i.e. when considering the specific purpose described in respect of the manufacturing method according to original claim 13. The skilled person, taking into account the disclosure of the entire application, would therefore have understood that, also when using a fixing member in form of a pressure-sensitive adhesive tape, all spirally wound layers of the mat-shaped holding sealing material must be allowed to move relatively to each other during the press-fitting step.

The appellant's argument that claim 13, in its most general form, covered methods which did not require the relative shifting between the wound layers upon press-fitting to take place also does not alter the Board's conclusion. Claim 1 of this request, as can be understood from the foregoing, does not rely merely on a combination of filed claims in their generality, but instead is based on the description.

According to the added features, the outermost layer and the adjacent inner layer are fixed to each other by a fixing member without however specifying that the so wound and fixed holding sealing material must still be able to perform this relative movement in the press-fitting step, albeit by some non-described method steps(s). The Board finds thus that the resulting intermediate generalisation of the disclosed manufacturing method is prima facie not directly and unambiguously derivable from the application as filed.

6.2 The Board is not persuaded by the appellant's argument that a fixing member in the form of a pressure-sensitive adhesive tape, as defined in claim 1, provides very low adhesive forces which would be overcome by the shear forces occurring during the press-fitting process. Although the Board can accept that adhesive forces of pressure-sensitive adhesive tapes are generally very low when peeling apart elements fixed by such tape, the Board does not accept that adhesive forces acting parallel to the plane of such an adhesive tape are necessarily also very low nor that these would be immediately overcome by the shear forces present during the press-fitting step. It is precisely the latter adhesive forces which are generated during press-fitting, i.e. not a resistance to peeling. The required relative movement during the press-fitting step can therefore not be considered to be an implicit consequence of the definition of the fixing member being a pressure-sensitive adhesive tape, nor did the appellant show that there was any disclosure of this alleged effect in the application.

Also the argument that relative movement might still be allowed between the remaining layers of the spirally wound holding sealing material, i.e. between those which are not fixed by the fixing member, does not change the Board's conclusion. Paragraph 54 clearly specifies that all layers are subject to the relative movement.

Finally the Board finds that the appellant's argument concerning a possible difficulty of defining such relative movement by clear wording in the claim is not a reason to allow such an undisclosed intermediate generalisation.

6.3 Claim 1 of the second auxiliary request does therefore also not prima facie fulfil the requirement of Article 123(2) EPC. As a consequence, the Board exercised its discretion not to admit this request into the proceedings (Article 13(1) RPBA).

7. In the absence of any set of claims complying with the requirements of the EPC, the decision of the opposition division, revoking the patent according to Article 101(3)(b) EPC, can only be confirmed.