T 2666/17 (Zephyros/composite) 26-04-2021

1. Auxiliary request 12 - Admittance

1.1 This request is admitted into these proceedings because the request having been submitted with the proprietor's reply to the grounds of appeal, the Board considers that the proprietor had no particular reason to file this request during first instance proceedings, because already in the annex to the summons to oral proceedings, the opposition division indicated that the patent as granted appeared to satisfy the requirements of the EPC.

1.2 Thus, as already indicated in its preliminary opinion, the Board sees no reason to exercise its discretion under Article 12(4) RPBA 2007 to exclude this request from the proceedings.

2. Newly filed facts and evidence - Admittance

2.1 The opponent relied on documents D10.4, D12 and D13 to support its objections under Article 83 EPC. These documents have been filed to support common general knowledge, in particular to demonstrate that the values obtained for the surface tension are affected by the measuring method and the measuring conditions. Since these alleged facts are not contested by the Board (see §3.2 of the present decision), there is no need to decide on the question of admittance under Article 12(4) RPBA 2007 (the content of these documents being not relevant for the underlying decision).

2.2 At the oral proceedings, the opponent indicated that it intended to present new inventive step objections against auxiliary request 12 using documents D8 and D10 as closest prior art. It argued that these objections had not been submitted earlier because it had thought it would be possible to do so at the oral proceedings.

2.2.1 The Board notes that although auxiliary request 12 was submitted already with the reply to the appeal, the opponent did neither react directly to the filing of this request nor even after the Board pointed out (§4.1 of the preliminary opinion) that there were no objections on file against the auxiliary requests, and that, if the opinion not to admit the newly submitted documents were confirmed, there would be no patentability objection on file.

2.2.2 The Board considers that, even though the submission of auxiliary request 12 could have justified the admittance of further objections if they were filed as an immediate reaction thereto, in the present case these cannot be admitted for the following reasons:

- The new facts cannot be admitted on the basis that they would represent a reaction to the filing of the new request, because, in view of point 2.2.1 above, it is apparent that the opponent had several opportunities to present objections against auxiliary request 12 earlier in the proceedings, and that there was no justification for waiting until the oral proceedings to do so;

- Articles 13(1) and (2) RPBA 2020 unequivocally point out that late amendments to the appeal case should only be admitted when these are not detrimental for the procedural economy and when exceptional circumstance apply. In this respect, the submission of objections at such late stage would not only be detrimental for procedural economy, but cannot be justified on the erroneous assumption that it would be possible to react at such late stage, as this does not represent an exceptional circumstance under Article 13(2) RPBA 2020.

2.2.3 The Board thus exercised its discretion not to admit the late filed inventive step objections against auxiliary request 12 starting from D8 or D10 as closest prior art, so that they are not to be taken into account.

3. Auxiliary request 12 - Article 83 EPC

In the board's view, the invention as defined in the claims of this request meets the requirement of sufficiency of disclosure pursuant to Article 83 EPC for the following reasons:

3.1 The appellant argued that the patent did not indicate how to measure the surface tension of the materials, despite the fact that this parameter was defined several times in claim 1 and was clearly essential for the invention. It was well known that the surface tension values were significantly affected by the measuring method and the temperature, a conclusion which was supported by documents D10.4 (table 4), D12 (pages 150-160) and D13 (page VI/531). Thus, a skilled person trying to reproduce the invention would not be able to find the appropriate materials, i.e. products having specific surface tension values as defined in claim 1. The examples did not help solving this problem, because no reference was made to the surface tension of the selected materials or to how this should be measured. The invention was therefore insufficiently disclosed.

3.2 The Board disagrees with the above argumentation for the following reasons:

According to established jurisprudence (see Case Law of the Board of Appeal, 9th ed., II.C.5.5 and T 815/07), the deficiencies in the definition of a parameter, such as the surface tension in the present case, only lead to a problem of sufficiency of disclosure if this parameter is so ill-defined that a skilled person is not able, using its general knowledge, to identify without undue burden the technical measures necessary to solve the underlying technical problem.

In the present case, it is noted that the surface tension is a well-known parameter which can be measured using known methods. Thus, carrying out the invention merely requires using any one of these methods to select materials having the defined surface tensions in order to promote the adhesion of the layers during the co-extrusion process.

It is not contested that the measuring method and conditions (such as temperature or aggregation state of the materials) would lead to different results (there is thus no need to additionally rely on D10.4, D12 and D13) and that the invention does not specify how to conduct these measurements. However, this would not prevent the skilled person from reproducing the invention, but would simply raise doubts as to whether certain embodiments at the edge of the scope of protection fall within the forbidden area or not. In this respect, the more recent decisions of the Boards have however established (see Case Law of the Board of Appeal, 9th ed., II.C.6.6.4) that the definition of the "forbidden area" of the claims does not concern Article 83 EPC but Article 84 EPC.

3.3 It follows from the above considerations that the Board could not establish any gap of information or lack of guidance in the patent in suit which could lead to the conclusion that the claimed invention was not sufficiently disclosed.

3.4 In view of this conclusion there is no need to decide on the admittance of documents D15 and D16, as these were filed by the respondent in support of its argumentation under Article 83 EPC.

4. Auxiliary request 12 - Article 84 EPC

4.1 Although no objection was raised against this request, the Board notes that the only aspect going beyond the combination of claims as granted is the definition of the load transfer effects as defined in claim 1 as filed. The Board considers that the scope of protection provided by these effects is clarified by the definition of specific technical features, in particular the co-extrusion step of layers of materials having the defined surface tensions and/or the definition of a reinforcement layer with functional groups as defined in claim 1. It is furthermore clear that the defined effects merely imply that the tensile strength and the lap shear of the resulting composite should be higher than those of the original materials.

4.2 The subject-matter of the claims is thus considered to be clear and the requirements of Article 84 EPC are thus complied with.

5. Auxiliary request 12 - Article 123 EPC

5.1 Claim 1 at issue is based on a combination of claims 1, 3, 4 and 11 as filed, wherein the terms "about" (in "about 35 dynes/cm") and "high" (in "high surface tension") have been deleted. These omissions do not change the original subject-matter, because the surface tension is anyway defined in the claim ("at least 35 dynes/cm") and the term "about" did not provide any meaningful limitation beyond adding a certain degree of uncertainty.

Dependent claims 2-6 and 8 at issue are respectively based on claims 2, 4, 6, 7, 8 and 12 as filed, and claim 7 at issue is based on claim 18 or paragraph 6 as filed.

The requirements of Article 123(2) EPC are thus met.

5.2 The subject-matter of the claims having been restricted with respect to that of the claims as granted, the requirements of Article 123(3) EPC are thus met either.

6. Auxiliary request 12 - Patentability

6.1 The Board notes that at the appeal proceedings, the opponent-appellant has only contested the opposition division's decision on patentability by submitting new documents and objections, which - as explained above - were not admitted by the Board under Article 13(2) RPBA 2020. There is thus no patentability objection on file against auxiliary request 12.

In the absence of such objection and since the opposition division concluded that a broader version of the claims (namely the claims as granted) met the requirements of patentability of the EPC (see §3 and §4 of the decision) in view of the cited prior art, no further assessment under Articles 54 and 56 EPC needs to be made ex officio.

6.2 There is also no need to decide on the admittance of document D14, as this document has not been cited to formulate objections against auxiliary request 12.

6.3 Furthermore, in view of the above conclusions, there is no need to decide on the admittance of documents D17 and D18, as these were filed by the respondent in support of its argumentation under Article 56 EPC.

7. The Board has therefore concluded that the claims of auxiliary request 12 meet the requirements of the EPC.